Unox Commercial Range Burner Not Igniting in Fernandina Beach, FL
Surface burner clicks but no flame, or no spark at all. Igniter, spark module, or gas valve. We fix this on Unox commercial ranges across Fernandina Beach. Call early and a technician is usually at your door that same afternoon.
Why your Unox commercial range is burner not igniting
When a Unox commercial range is burner not igniting, here's what you'll usually notice: surface burner clicks but no flame, or no spark at all. Igniter, spark module, or gas valve. On this platform it's most often failed spark module. Left unaddressed, the kitchen loses a station it can't work around.
Most likely causes
- Clogged burner ports
- A faulty gas valve
- A weak spark electrode
Known Unox commercial range weak points
- Limescale scaling in steam/spray system in hard water
- Fan motor bearing wear
- Door gasket wear
- Touchscreen or control board faults
Quick check — and when it's not DIY
Do this first — it takes two minutes: confirm the burner ports and igniter are dry and free of spilled food or debris. Also, check whether other burners on the same unit ignite normally, which narrows the fault to one burner or the whole unit. If it's still acting up after that, if it still won't spark, the igniter, spark module, or gas valve is at fault, and gas components aren't a homeowner repair by code in most areas.
How we fix it
We start with a full diagnostic on the Unox commercial range, confirm the real fault, then price it flat. OEM parts available via Unox and PartsTown; regular descaling advised in hard-water areas; electrical work requires a qualified technician. The quote is flat, approved before we start, and every repair carries our warranty.
Independent commercial foodservice repair experienced with Unox combi and convection ovens; not an authorized Unox service center.
What Fernandina Beach homeowners say
on the First Coast
“They squeezed our Unox commercial range in on a busy day and still showed up inside the window. Clean, on-time, and they took the old part with them. Would call again.”
“Same-day response — a tech was diagnosing the Unox commercial range hours after I called. They clearly knew Unox inside out and had the part on the truck.”
“The Unox commercial range died mid-week and they had it sorted before I'd even rearranged my schedule. Flat price agreed up front, and they stood behind the labour warranty.”
Other Unox commercial range problems we fix
Frequently asked questions
How much does a Unox commercial range that is burner not igniting cost?
Typical costs for a Unox commercial range that is burner not igniting land between $200–$880, parts and labour included. The $149 call-out is applied to the job and the quote is flat — no meter running.
Can you come out same-day in Fernandina Beach?
Same-day is common in Fernandina Beach. Our trucks run the area every day and emergency slots are held open for breakdowns that can't wait.
Do you warranty your repairs?
We stand behind the work with a 1-year labour warranty and 6-month parts warranty — if it recurs in that time, we fix it again for free.
Do you charge for the estimate?
A flat $149 covers the on-site diagnosis and rolls into the repair price. What we quote is what you pay — no add-ons.
Get same-day service in Fernandina Beach.
Flat-rate pricing, 1 year labour warranty, and fast dispatch.