Blodgett Commercial Range Burner Not Igniting in Fleming Island, FL
Surface burner clicks but no flame, or no spark at all. Igniter, spark module, or gas valve. We fix this on Blodgett commercial ranges across Fleming Island. Call early and a technician is usually at your door that same afternoon.
Why your Blodgett commercial range is burner not igniting
On a Blodgett commercial range, burner not igniting usually announces itself like this: surface burner clicks but no flame, or no spark at all. Igniter, spark module, or gas valve. Nine times out of ten it comes down to loose igniter wiring. Left unaddressed, the kitchen loses a station it can't work around.
Most likely causes
- A weak spark electrode
- A dirty or wet igniter
- Clogged burner ports
Known Blodgett commercial range weak points
- convection blower motor and bearing failures
- door gasket wear and hinge/spring failures causing heat loss
- spark igniter/ignition module and gas valve faults on gas models
- thermostat/temperature calibration drift and contactor failures on electric models
Quick check — and when it's not DIY
Before booking a repair, confirm the burner ports and igniter are dry and free of spilled food or debris. Also, check whether other burners on the same unit ignite normally, which narrows the fault to one burner or the whole unit. If that doesn't fix it, if it still won't spark, the igniter, spark module, or gas valve is at fault, and gas components aren't a homeowner repair by code in most areas.
How we fix it
An experienced tech tests the Blodgett commercial range systematically and pinpoints what's actually causing the burner not igniting. OEM Blodgett/Middleby parts are widely available; gas ignition and valve work requires a licensed technician per local code. Most burner not igniting jobs finish same-day, at a flat price, under our warranty.
Independent commercial service experienced with Blodgett ovens; not an authorized Blodgett dealer.
What Fleming Island homeowners say
on the First Coast
“Same-day response — a tech was diagnosing the Blodgett commercial range hours after I called. Genuine parts, done in one trip, and the invoice matched the quote.”
“They squeezed our Blodgett commercial range in on a busy day and still showed up inside the window. Flat price agreed up front, and they stood behind the labour warranty.”
“No waiting around — the Blodgett commercial range was diagnosed within an hour of the tech arriving. They clearly knew Blodgett inside out and had the part on the truck.”
Other Blodgett commercial range problems we fix
Frequently asked questions
What's the price for a Blodgett commercial range that is burner not igniting?
Most repairs for a Blodgett commercial range that is burner not igniting run $200–$880 including parts and labour. The $149 diagnostic is credited in full toward the repair when you go ahead, and you get a flat quote before any work starts.
Is the repair guaranteed?
We stand behind the work with a 1-year labour warranty and 6-month parts warranty — if it recurs in that time, we fix it again for free.
Can you come out same-day in Fleming Island?
Yes. We cover Fleming Island daily and offer same-day and emergency service. Booking earlier in the day gives the best chance of an afternoon slot.
Do you charge for the estimate?
The $149 diagnostic covers a full on-site inspection and is applied to your repair total. There are no hidden trip charges or surcharges on top of your quote.
Get same-day service in Fleming Island.
Flat-rate pricing, 1 year labour warranty, and fast dispatch.