Brema Ice Machine Leaking Water in Fleming Island, FL
Puddles around or under the appliance — could be drain pan, gasket, water inlet valve, or hose failure. We fix this on Brema ice machines across Fleming Island. Call before noon and there's a good chance of a same-day visit.
Why your Brema ice machine is leaking water
Here's how leaking water typically presents on a Brema ice machine: puddles around or under the appliance — could be drain pan, gasket, water inlet valve, or hose failure. The usual culprit is failed water inlet valve. Left unaddressed, food or stock can spoil within hours.
Most likely causes
- Worn door gasket
- Cracked reservoir or filter housing
- A cracked or clogged drain pan
- A loose or split supply hose
Known Brema ice machine weak points
- Scale buildup on the spray/evaporator system reducing output
- Water pump and inlet valve failures
- Reduced production from a dirty or poorly ventilated condenser
- Euro-spec components can be slower to source in the US
Quick check — and when it's not DIY
Do this first — it takes two minutes: trace exactly where water first appears, since that narrows down whether it's a hose, gasket, or drain issue. If it's still acting up after that, a leak that keeps coming back is typically inside the sealed system or behind a panel, and chasing it further risks water damage to electrical components best left to a technician.
How we fix it
We start with a full diagnostic on the Brema ice machine, confirm the real fault, then price it flat. OEM parts are available through Brema/Hoshizaki distribution but some Euro-spec components take longer to source, and sealed-system refrigerant work requires an experienced technician. You approve a flat price up front, and the work is backed by our labour and parts warranty.
independent commercial service — experienced with Brema ice makers, not authorized by the manufacturer
What Fleming Island homeowners say
on the First Coast
“Two other shops couldn't fit us in — these guys fixed the Brema ice machine the same day. No runaround — they told me honestly what it needed and fixed just that.”
“Called late at night and a tech was here by mid-morning to look at the Brema ice machine. The tech explained exactly what went wrong before touching anything.”
“No waiting around — the Brema ice machine was diagnosed within an hour of the tech arriving. Fair price, no surprise fees, and the Brema ice machine has worked perfectly since.”
Frequently asked questions
Do you offer same-day service in Fleming Island?
We do — Fleming Island is on our daily route, with same-day and after-hours emergency slots. The earlier you call, the better the odds of a same-day visit.
What if the same problem comes back?
We stand behind the work with a 1-year labour warranty and 6-month parts warranty — if it recurs in that time, we fix it again for free.
What does a Brema ice machine that is leaking water usually cost?
Typical costs for a Brema ice machine that is leaking water land between $220–$950, parts and labour included. The $149 call-out is applied to the job and the quote is flat — no meter running.
Is there a fee for the diagnostic?
We charge $149 for a full diagnostic, credited to the repair if you proceed. No separate trip fee and no surcharges added later.
Get same-day service in Fleming Island.
Flat-rate pricing, 1 year labour warranty, and fast dispatch.