Blodgett Combi Oven Water Not Filling in Jacksonville, FL
Cycle starts but no water enters. Water inlet valve, hoses, or float switch. We fix this on Blodgett combi ovens across Jacksonville. Our trucks run this area every day, so next-day is the norm and same-day is common.
Why your Blodgett combi oven is water not filling
Here's how water not filling typically presents on a Blodgett combi oven: cycle starts but no water enters. Water inlet valve, hoses, or float switch. Nine times out of ten it comes down to a clogged inlet screen. Left unaddressed, the kitchen loses a station it can't work around.
Most likely causes
- A clogged inlet screen
- Control board timing fault
- A bad float or pressure switch
- Low household water pressure
- Kinked fill hose
Known Blodgett combi oven weak points
- convection blower motor and bearing failures
- door gasket wear and hinge/spring failures causing heat loss
- spark igniter/ignition module and gas valve faults on gas models
- thermostat/temperature calibration drift and contactor failures on electric models
Quick check — and when it's not DIY
Start here — it costs nothing and rules out the easy cause: check the inlet screen for mineral buildup or debris if you can access it without tools. Also, check that the water supply valve is fully open and the inlet hose isn't kinked. If it's still acting up after that, if water still isn't reaching the unit, the inlet valve or an internal sensor has failed, and replacing those safely means shutting off house water and opening the cabinet.
How we fix it
An experienced tech tests the Blodgett combi oven systematically and pinpoints what's actually causing the water not filling. OEM Blodgett/Middleby parts are widely available; gas ignition and valve work requires a licensed technician per local code. You approve a flat price up front, and the work is backed by our labour and parts warranty.
Independent commercial service experienced with Blodgett ovens; not an authorized Blodgett dealer.
What Jacksonville homeowners say
on the First Coast
“Called about our Blodgett combi oven in the morning and it was running again by evening. The tech explained exactly what went wrong before touching anything.”
“Called late at night and a tech was here by mid-morning to look at the Blodgett combi oven. No runaround — they told me honestly what it needed and fixed just that.”
“Two other shops couldn't fit us in — these guys fixed the Blodgett combi oven the same day. The diagnostic fee came off the repair total, just like they promised.”
Other Blodgett combi oven problems we fix
Frequently asked questions
Do you charge for the estimate?
We charge $149 for a full diagnostic, credited to the repair if you proceed. No separate trip fee and no surcharges added later.
What if the same problem comes back?
Every repair is backed by a 1-year labour warranty and a 6-month parts warranty. If the same issue returns in that window, we come back at no charge.
Do you offer same-day service in Jacksonville?
Same-day is common in Jacksonville. Our trucks run the area every day and emergency slots are held open for breakdowns that can't wait.
How much does a Blodgett combi oven that is water not filling cost?
Typical costs for a Blodgett combi oven that is water not filling land between $200–$880, parts and labour included. The $149 call-out is applied to the job and the quote is flat — no meter running.
Get same-day service in Jacksonville.
Flat-rate pricing, 1 year labour warranty, and fast dispatch.