Blodgett Commercial Steamer Not Heating in Jacksonville, FL
Appliance runs but doesn't reach set temperature. Failed heating element, igniter, or thermal fuse. We fix this on Blodgett commercial steamers across Jacksonville. Same-day service is standard here, not a rush-fee upsell.
Why your Blodgett commercial steamer is not heating
Catching not heating early on a Blodgett commercial steamer is usually straightforward: appliance runs but doesn't reach set temperature. Failed heating element, igniter, or thermal fuse. The usual culprit is faulty temperature sensor. Left unaddressed, the kitchen loses a station it can't work around.
Most likely causes
- A bad control board
- Tripped thermal fuse
- Burned-out heating element
Known Blodgett commercial steamer weak points
- convection blower motor and bearing failures
- door gasket wear and hinge/spring failures causing heat loss
- spark igniter/ignition module and gas valve faults on gas models
- thermostat/temperature calibration drift and contactor failures on electric models
Quick check — and when it's not DIY
Before you call anyone, confirm the commercial steamer has power, any gas supply valve is open, and a simple reset — power off 60 seconds, back on — doesn't restore heat. Once you've ruled that out, no spark or flame usually means the igniter or gas valve itself has failed, and gas-carrying parts are restricted to licensed work in most jurisdictions.
How we fix it
An experienced tech tests the Blodgett commercial steamer systematically and pinpoints what's actually causing the not heating. OEM Blodgett/Middleby parts are widely available; gas ignition and valve work requires a licensed technician per local code. The quote is flat, approved before we start, and every repair carries our warranty.
Independent commercial service experienced with Blodgett ovens; not an authorized Blodgett dealer.
What Jacksonville homeowners say
on the First Coast
“Two other shops couldn't fit us in — these guys fixed the Blodgett commercial steamer the same day. Genuine Blodgett part, flat price, and done in a single visit.”
“The Blodgett commercial steamer broke right before the weekend and they still came out same-day. You can tell they work on Blodgett all the time — quick, clean diagnosis.”
“Called about our Blodgett commercial steamer in the morning and it was running again by evening. Stood behind the warranty and used a real Blodgett OEM part, not a knockoff.”
Other Blodgett commercial steamer problems we fix
Blodgett Commercial Steamer repair nearby
Frequently asked questions
Do you charge for the estimate?
The $149 diagnostic covers a full on-site inspection and is applied to your repair total. There are no hidden trip charges or surcharges on top of your quote.
What does a Blodgett commercial steamer that is not heating usually cost?
Typical costs for a Blodgett commercial steamer that is not heating land between $200–$880, parts and labour included. The $149 call-out is applied to the job and the quote is flat — no meter running.
How fast can you get to Jacksonville?
Yes. We cover Jacksonville daily and offer same-day and emergency service. Booking earlier in the day gives the best chance of an afternoon slot.
Do you warranty your repairs?
You're covered by our 1-year labour warranty and 6-month parts warranty. Should the same fault return inside that period, the follow-up visit is free.
Get same-day service in Jacksonville.
Flat-rate pricing, 1 year labour warranty, and fast dispatch.