Hobart Commercial Oven Not Heating in Jacksonville, FL
Appliance runs but doesn't reach set temperature. Failed heating element, igniter, or thermal fuse. We fix this on Hobart commercial ovens across Jacksonville. You get a two-hour arrival window, not a vague 'sometime today'.
Why your Hobart commercial oven is not heating
Catching not heating early on a Hobart commercial oven is usually straightforward: appliance runs but doesn't reach set temperature. Failed heating element, igniter, or thermal fuse. The usual culprit is failed igniter or gas valve. Left unaddressed, the kitchen loses a station it can't work around.
Most likely causes
- Burned-out heating element
- Failed igniter or gas valve
- Faulty temperature sensor
Known Hobart commercial oven weak points
- wash/rinse arm clogging and scale buildup reducing wash quality
- booster heater and rinse heating element failures causing low sanitizing temperatures
- wash pump motor/seal leaks and drain-valve issues
- door interlock switch and fill/float valve failures
Quick check — and when it's not DIY
There's one thing worth checking before you book anyone: check whether an ignition click or spark is audible at all when it should be heating. Also, confirm the commercial oven has power, any gas supply valve is open, and a simple reset — power off 60 seconds, back on — doesn't restore heat. Should that not clear it, no spark or flame usually means the igniter or gas valve itself has failed, and gas-carrying parts are restricted to licensed work in most jurisdictions.
How we fix it
First we diagnose the Hobart commercial oven end to end, so you're not paying to swap parts on a guess. Genuine Hobart parts and OEM service kits are widely available; electrical, plumbing, and booster/gas connections must meet local code and be handled by a qualified technician. Most not heating jobs finish same-day, at a flat price, under our warranty.
Independent commercial service experienced with Hobart warewashing equipment; not an authorized Hobart dealer.
What Jacksonville homeowners say
on the First Coast
“Called about our Hobart commercial oven in the morning and it was running again by evening. Stood behind the warranty and used a real Hobart OEM part, not a knockoff.”
“Called late at night and a tech was here by mid-morning to look at the Hobart commercial oven. Fixed on the first visit — the flat price matched the quote exactly, no upsell.”
“Two other shops couldn't fit us in — these guys fixed the Hobart commercial oven the same day. Genuine Hobart part, flat price, and done in a single visit.”
Frequently asked questions
How much does a Hobart commercial oven that is not heating cost?
Typical costs for a Hobart commercial oven that is not heating land between $200–$880, parts and labour included. The $149 call-out is applied to the job and the quote is flat — no meter running.
How fast can you get to Jacksonville?
We do — Jacksonville is on our daily route, with same-day and after-hours emergency slots. The earlier you call, the better the odds of a same-day visit.
Is the repair guaranteed?
We stand behind the work with a 1-year labour warranty and 6-month parts warranty — if it recurs in that time, we fix it again for free.
Do you charge for the estimate?
The $149 diagnostic covers a full on-site inspection and is applied to your repair total. There are no hidden trip charges or surcharges on top of your quote.
Get same-day service in Jacksonville.
Flat-rate pricing, 1 year labour warranty, and fast dispatch.