Imperial Commercial Range Burner Not Igniting in Jacksonville, FL
Surface burner clicks but no flame, or no spark at all. Igniter, spark module, or gas valve. We fix this on Imperial commercial ranges across Jacksonville. Call early and a technician is usually at your door that same afternoon.
Why your Imperial commercial range is burner not igniting
Here's how burner not igniting typically presents on a Imperial commercial range: surface burner clicks but no flame, or no spark at all. Igniter, spark module, or gas valve. Nine times out of ten it comes down to a faulty gas valve. Left unaddressed, the kitchen loses a station it can't work around.
Most likely causes
- A dirty or wet igniter
- A faulty gas valve
- Loose igniter wiring
- Failed spark module
Known Imperial commercial range weak points
- standing-pilot and thermocouple failures preventing burner ignition
- burner valve and orifice wear causing weak or uneven flame
- oven and fryer thermostat drift affecting temperature accuracy
- griddle plate warping and thermostat faults over heavy use
Quick check — and when it's not DIY
Before you call anyone, confirm the burner ports and igniter are dry and free of spilled food or debris. Also, check whether other burners on the same unit ignite normally, which narrows the fault to one burner or the whole unit. When that isn't the fix, if it still won't spark, the igniter, spark module, or gas valve is at fault, and gas components aren't a homeowner repair by code in most areas.
How we fix it
Our technician runs a full diagnostic on your Imperial commercial range and isolates the exact cause before quoting. OEM parts are available (Imperial is now Middleby-owned) through Parts Town and PartsFPS; gas work requires a licensed technician. The quote is flat, approved before we start, and every repair carries our warranty.
Independent commercial service experienced with Imperial cooking equipment; not authorized by the manufacturer.
What Jacksonville homeowners say
on the First Coast
“They squeezed our Imperial commercial range in on a busy day and still showed up inside the window. Flat price agreed up front, and they stood behind the labour warranty.”
“Same-day response — a tech was diagnosing the Imperial commercial range hours after I called. Genuine parts, done in one trip, and the invoice matched the quote.”
“The Imperial commercial range broke right before the weekend and they still came out same-day. Clean, on-time, and they took the old part with them. Would call again.”
Other Imperial commercial range problems we fix
Frequently asked questions
Do you offer same-day service in Jacksonville?
Same-day is common in Jacksonville. Our trucks run the area every day and emergency slots are held open for breakdowns that can't wait.
What if the same problem comes back?
You're covered by our 1-year labour warranty and 6-month parts warranty. Should the same fault return inside that period, the follow-up visit is free.
Is there a fee for the diagnostic?
A flat $149 covers the on-site diagnosis and rolls into the repair price. What we quote is what you pay — no add-ons.
What's the price for a Imperial commercial range that is burner not igniting?
Expect $200–$880 for parts and labour on a Imperial commercial range that is burner not igniting. We charge a $149 diagnostic that comes off the repair total, and nothing begins until you approve a flat price.
Get same-day service in Jacksonville.
Flat-rate pricing, 1 year labour warranty, and fast dispatch.