Blodgett Commercial Oven Not Heating in Lakeside, FL
Appliance runs but doesn't reach set temperature. Failed heating element, igniter, or thermal fuse. We fix this on Blodgett commercial ovens across Lakeside. Call early and a technician is usually at your door that same afternoon.
Why your Blodgett commercial oven is not heating
When a Blodgett commercial oven is not heating, here's what you'll usually notice: appliance runs but doesn't reach set temperature. Failed heating element, igniter, or thermal fuse. The usual culprit is faulty temperature sensor. Left unaddressed, the kitchen loses a station it can't work around.
Most likely causes
- Tripped thermal fuse
- Failed igniter or gas valve
- Burned-out heating element
- A broken door switch cutting the heat circuit
- Faulty temperature sensor
Known Blodgett commercial oven weak points
- convection blower motor and bearing failures
- door gasket wear and hinge/spring failures causing heat loss
- spark igniter/ignition module and gas valve faults on gas models
- thermostat/temperature calibration drift and contactor failures on electric models
Quick check — and when it's not DIY
Before booking a repair, check whether an ignition click or spark is audible at all when it should be heating. If that doesn't fix it, heating elements, igniters, and gas valves combine high current or combustible gas, and that combination is a licensed-technician job, not a home fix.
How we fix it
Our technician runs a full diagnostic on your Blodgett commercial oven and isolates the exact cause before quoting. OEM Blodgett/Middleby parts are widely available; gas ignition and valve work requires a licensed technician per local code. You approve a flat price up front, and the work is backed by our labour and parts warranty.
Independent commercial service experienced with Blodgett ovens; not an authorized Blodgett dealer.
What Lakeside homeowners say
on the First Coast
“Called late at night and a tech was here by mid-morning to look at the Blodgett commercial oven. The diagnostic fee came off the repair total, just like they promised.”
“Two other shops couldn't fit us in — these guys fixed the Blodgett commercial oven the same day. Fair price, no surprise fees, and the Blodgett commercial oven has worked perfectly since.”
“Our Blodgett commercial oven quit on us and they had a technician out the same afternoon in Lakeside. The tech explained exactly what went wrong before touching anything.”
Frequently asked questions
Can you come out same-day in Lakeside?
Same-day is common in Lakeside. Our trucks run the area every day and emergency slots are held open for breakdowns that can't wait.
What if the same problem comes back?
You're covered by our 1-year labour warranty and 6-month parts warranty. Should the same fault return inside that period, the follow-up visit is free.
What does a Blodgett commercial oven that is not heating usually cost?
Most repairs for a Blodgett commercial oven that is not heating run $200–$880 including parts and labour. The $149 diagnostic is credited in full toward the repair when you go ahead, and you get a flat quote before any work starts.
Do you charge for the estimate?
We charge $149 for a full diagnostic, credited to the repair if you proceed. No separate trip fee and no surcharges added later.
Get same-day service in Lakeside.
Flat-rate pricing, 1 year labour warranty, and fast dispatch.