Duke Manufacturing Commercial Range Burner Not Igniting in Lakeside, FL
Surface burner clicks but no flame, or no spark at all. Igniter, spark module, or gas valve. We fix this on Duke Manufacturing commercial ranges across Lakeside. Call early and a technician is usually at your door that same afternoon.
Why your Duke Manufacturing commercial range is burner not igniting
Catching burner not igniting early on a Duke Manufacturing commercial range is usually straightforward: surface burner clicks but no flame, or no spark at all. Igniter, spark module, or gas valve. More often than not it traces back to clogged burner ports. Left unaddressed, the kitchen loses a station it can't work around.
Most likely causes
- A dirty or wet igniter
- Clogged burner ports
- Loose igniter wiring
- Failed spark module
- A weak spark electrode
Known Duke Manufacturing commercial range weak points
- Hot-well heating element and thermostat failures
- Wet-well water evaporation and scaling affecting holding temperatures
- Holding-cabinet control board and thermostat faults
- Convection oven blower motor and door gasket wear
Quick check — and when it's not DIY
One thing you can rule out on your own: confirm the burner ports and igniter are dry and free of spilled food or debris. Beyond that, if it still won't spark, the igniter, spark module, or gas valve is at fault, and gas components aren't a homeowner repair by code in most areas.
How we fix it
We trace the burner not igniting on your Duke Manufacturing commercial range to its source instead of throwing parts at it. OEM parts widely available via Duke and Parts Town; gas convection and cooking models require a licensed technician. You approve a flat price up front, and the work is backed by our labour and parts warranty.
Independent commercial service experienced with Duke serving, holding, and cooking equipment; not authorized by or a factory dealer for the manufacturer.
What Lakeside homeowners say
on the First Coast
“Called late at night and a tech was here by mid-morning to look at the Duke Manufacturing commercial range. Flat price agreed up front, and they stood behind the labour warranty.”
“Two other shops couldn't fit us in — these guys fixed the Duke Manufacturing commercial range the same day. Genuine parts, done in one trip, and the invoice matched the quote.”
“Our Duke Manufacturing commercial range quit on us and they had a technician out the same afternoon in Lakeside. Clean, on-time, and they took the old part with them. Would call again.”
Other Duke Manufacturing commercial range problems we fix
Frequently asked questions
What does a Duke Manufacturing commercial range that is burner not igniting usually cost?
Most repairs for a Duke Manufacturing commercial range that is burner not igniting run $200–$880 including parts and labour. The $149 diagnostic is credited in full toward the repair when you go ahead, and you get a flat quote before any work starts.
Do you charge for the estimate?
We charge $149 for a full diagnostic, credited to the repair if you proceed. No separate trip fee and no surcharges added later.
Do you warranty your repairs?
You're covered by our 1-year labour warranty and 6-month parts warranty. Should the same fault return inside that period, the follow-up visit is free.
Can you come out same-day in Lakeside?
Yes. We cover Lakeside daily and offer same-day and emergency service. Booking earlier in the day gives the best chance of an afternoon slot.
Get same-day service in Lakeside.
Flat-rate pricing, 1 year labour warranty, and fast dispatch.