Imperial Commercial Stove Burner Not Igniting in Lakeside, FL
Surface burner clicks but no flame, or no spark at all. Igniter, spark module, or gas valve. We fix this on Imperial commercial stoves across Lakeside. Emergency slots stay open daily for breakdowns that can't wait.
Why your Imperial commercial stove is burner not igniting
On a Imperial commercial stove, burner not igniting usually announces itself like this: surface burner clicks but no flame, or no spark at all. Igniter, spark module, or gas valve. Nine times out of ten it comes down to a dirty or wet igniter. Left unaddressed, the kitchen loses a station it can't work around.
Most likely causes
- A dirty or wet igniter
- Loose igniter wiring
- A weak spark electrode
- Clogged burner ports
- A faulty gas valve
Known Imperial commercial stove weak points
- standing-pilot and thermocouple failures preventing burner ignition
- burner valve and orifice wear causing weak or uneven flame
- oven and fryer thermostat drift affecting temperature accuracy
- griddle plate warping and thermostat faults over heavy use
Quick check — and when it's not DIY
Worth checking yourself first: check whether other burners on the same unit ignite normally, which narrows the fault to one burner or the whole unit. If none of that changes anything, a gas valve or spark module fault means working on live gas and ignition components, which is licensed work in most areas.
How we fix it
We start with a full diagnostic on the Imperial commercial stove, confirm the real fault, then price it flat. OEM parts are available (Imperial is now Middleby-owned) through Parts Town and PartsFPS; gas work requires a licensed technician. The quote is flat, approved before we start, and every repair carries our warranty.
Independent commercial service experienced with Imperial cooking equipment; not authorized by the manufacturer.
What Lakeside homeowners say
on the First Coast
“They squeezed our Imperial commercial stove in on a busy day and still showed up inside the window. Fixed on the first visit — the flat price matched the quote exactly, no upsell.”
“No waiting around — the Imperial commercial stove was diagnosed within an hour of the tech arriving. Stood behind the warranty and used a real Imperial OEM part, not a knockoff.”
“The Imperial commercial stove died mid-week and they had it sorted before I'd even rearranged my schedule. You can tell they work on Imperial all the time — quick, clean diagnosis.”
Other Imperial commercial stove problems we fix
Frequently asked questions
How much does a Imperial commercial stove that is burner not igniting cost?
Typical costs for a Imperial commercial stove that is burner not igniting land between $200–$880, parts and labour included. The $149 call-out is applied to the job and the quote is flat — no meter running.
What if the same problem comes back?
We stand behind the work with a 1-year labour warranty and 6-month parts warranty — if it recurs in that time, we fix it again for free.
How fast can you get to Lakeside?
Same-day is common in Lakeside. Our trucks run the area every day and emergency slots are held open for breakdowns that can't wait.
What does the call-out cost?
A flat $149 covers the on-site diagnosis and rolls into the repair price. What we quote is what you pay — no add-ons.
Get same-day service in Lakeside.
Flat-rate pricing, 1 year labour warranty, and fast dispatch.