Perlick Bar Glass Washer Not Draining in Lakeside, FL
Water pools at the bottom of the tub. Usually drain pump, clog, or check-valve. We fix this on Perlick bar glass washers across Lakeside. Same-day service is standard here, not a rush-fee upsell.

Why your Perlick bar glass washer is not draining
A Perlick bar glass washer that is not draining tends to show the same signs: water pools at the bottom of the tub. Usually drain pump, clog, or check-valve. On this platform it's most often clogged drain pump or filter. Left unaddressed, laundry backs up fast.
Most likely causes
- Failed drain pump motor
- Clogged drain pump or filter
- Debris jamming the impeller
- Control board not signalling the pump
Known Perlick bar glass washer weak points
- condenser coils clogging with bar dust and lint
- door gasket wear and hinge sag on reach-under boxes
- beer faucet and shank seal leaks
- glycol power-pack / circulation pump faults on remote systems
Quick check — and when it's not DIY
The one self-check that's actually worth your time: check the drain hose isn't kinked or blocked and clear any visible debris from an accessible filter. Also, check whether the unit is sitting level, since a strong tilt alone can stop proper draining. If that doesn't fix it, if it still won't drain, the pump or an internal valve has likely failed, and opening the unit yourself can void the manufacturer's warranty.
How we fix it
An experienced tech tests the Perlick bar glass washer systematically and pinpoints what's actually causing the not draining. OEM parts widely available through Perlick and bar-equipment distributors; sealed-system refrigerant repairs requires an experienced technician. You approve a flat price up front, and the work is backed by our labour and parts warranty.
Independent commercial service experienced with Perlick bar and beverage equipment; not an authorized Perlick dealer.
What Lakeside homeowners say
on the First Coast
“Called about our Perlick bar glass washer in the morning and it was running again by evening. Fixed on the first visit — the flat price matched the quote exactly, no upsell.”
“Our Perlick bar glass washer quit on us and they had a technician out the same afternoon in Lakeside. Stood behind the warranty and used a real Perlick OEM part, not a knockoff.”
“Two other shops couldn't fit us in — these guys fixed the Perlick bar glass washer the same day. You can tell they work on Perlick all the time — quick, clean diagnosis.”
Other Perlick bar glass washer problems we fix
Frequently asked questions
How much does a Perlick bar glass washer that is not draining cost?
Typical costs for a Perlick bar glass washer that is not draining land between $190–$720, parts and labour included. The $149 call-out is applied to the job and the quote is flat — no meter running.
Is the repair guaranteed?
You're covered by our 1-year labour warranty and 6-month parts warranty. Should the same fault return inside that period, the follow-up visit is free.
What does the call-out cost?
The $149 diagnostic covers a full on-site inspection and is applied to your repair total. There are no hidden trip charges or surcharges on top of your quote.
How fast can you get to Lakeside?
Yes. We cover Lakeside daily and offer same-day and emergency service. Booking earlier in the day gives the best chance of an afternoon slot.
Get same-day service in Lakeside.
Flat-rate pricing, 1 year labour warranty, and fast dispatch.