Randell Walk-In Cooler Not Cooling in Middleburg, FL
Unit runs but temperature stays warm — usually a compressor, condenser, or refrigerant issue. We fix this on Randell walk-in coolers across Middleburg. Our trucks run this area every day, so next-day is the norm and same-day is common.
Why your Randell walk-in cooler is not cooling
When a Randell walk-in cooler is not cooling, here's what you'll usually notice: unit runs but temperature stays warm — usually a compressor, condenser, or refrigerant issue. The usual culprit is a bad evaporator fan motor. Left unaddressed, food or stock can spoil within hours.
Most likely causes
- Refrigerant leak in the sealed system
- Worn door gaskets bleeding cold air
- A stuck or failed damper control
- A bad evaporator fan motor
Known Randell walk-in cooler weak points
- Clogged condensate drains causing water pooling inside the cabinet
- Cracked or worn door gaskets losing seal and forcing compressor overwork
- Dirty condenser coils causing short-cycling and poor temperature hold
- Condenser or evaporator fan motor failure leaving product too warm
Quick check — and when it's not DIY
Do this first — it takes two minutes: confirm the walk-in cooler has power, the thermostat is actually set cold, and the condenser coils or vents aren't blocked by dust or stored items. Also, listen for the compressor running at all, and make sure nothing is blocking airflow around the back or bottom vents. Once you've ruled that out, the cause is almost always a failed compressor or a refrigerant leak in the sealed system, and handling refrigerant legally requires an experienced technician — which is where DIY stops.
How we fix it
We trace the not cooling on your Randell walk-in cooler to its source instead of throwing parts at it. Randell/Unified Brands OEM parts are widely available through PartsTown and foodservice distributors, though sealed-system refrigerant repairs require an experienced technician. Most not cooling jobs finish same-day, at a flat price, under our warranty.
independent commercial service — experienced with Randell refrigeration and prep tables, not authorized by the manufacturer
What Middleburg homeowners say
on the First Coast
“Two other shops couldn't fit us in — these guys fixed the Randell walk-in cooler the same day. Clean, on-time, and they took the old part with them. Would call again.”
“The Randell walk-in cooler broke right before the weekend and they still came out same-day. They clearly knew Randell inside out and had the part on the truck.”
“No waiting around — the Randell walk-in cooler was diagnosed within an hour of the tech arriving. Flat price agreed up front, and they stood behind the labour warranty.”
Frequently asked questions
What if the same problem comes back?
We stand behind the work with a 1-year labour warranty and 6-month parts warranty — if it recurs in that time, we fix it again for free.
What does a Randell walk-in cooler that is not cooling usually cost?
Typical costs for a Randell walk-in cooler that is not cooling land between $280–$1,495, parts and labour included. The $149 call-out is applied to the job and the quote is flat — no meter running.
How fast can you get to Middleburg?
We do — Middleburg is on our daily route, with same-day and after-hours emergency slots. The earlier you call, the better the odds of a same-day visit.
What does the call-out cost?
The $149 diagnostic covers a full on-site inspection and is applied to your repair total. There are no hidden trip charges or surcharges on top of your quote.
Get same-day service in Middleburg.
Flat-rate pricing, 1 year labour warranty, and fast dispatch.