Unox Commercial Range Not Heating in Middleburg, FL
Appliance runs but doesn't reach set temperature. Failed heating element, igniter, or thermal fuse. We fix this on Unox commercial ranges across Middleburg. Call before noon and there's a good chance of a same-day visit.
Why your Unox commercial range is not heating
When a Unox commercial range is not heating, here's what you'll usually notice: appliance runs but doesn't reach set temperature. Failed heating element, igniter, or thermal fuse. Nine times out of ten it comes down to a broken door switch cutting the heat circuit. Left unaddressed, the kitchen loses a station it can't work around.
Most likely causes
- Failed igniter or gas valve
- Faulty temperature sensor
- Tripped thermal fuse
- A broken door switch cutting the heat circuit
Known Unox commercial range weak points
- Limescale scaling in steam/spray system in hard water
- Fan motor bearing wear
- Door gasket wear
- Touchscreen or control board faults
Quick check — and when it's not DIY
Do this first — it takes two minutes: check whether an ignition click or spark is audible at all when it should be heating. Also, confirm the commercial range has power, any gas supply valve is open, and a simple reset — power off 60 seconds, back on — doesn't restore heat. When that isn't the fix, heating elements, igniters, and gas valves combine high current or combustible gas, and that combination is a licensed-technician job, not a home fix.
How we fix it
First we diagnose the Unox commercial range end to end, so you're not paying to swap parts on a guess. OEM parts available via Unox and PartsTown; regular descaling advised in hard-water areas; electrical work requires a qualified technician. You approve a flat price up front, and the work is backed by our labour and parts warranty.
Independent commercial foodservice repair experienced with Unox combi and convection ovens; not an authorized Unox service center.
What Middleburg homeowners say
on the First Coast
“The Unox commercial range broke right before the weekend and they still came out same-day. Genuine parts, done in one trip, and the invoice matched the quote.”
“Two other shops couldn't fit us in — these guys fixed the Unox commercial range the same day. Flat price agreed up front, and they stood behind the labour warranty.”
“Called late at night and a tech was here by mid-morning to look at the Unox commercial range. They clearly knew Unox inside out and had the part on the truck.”
Other Unox commercial range problems we fix
Frequently asked questions
What does the call-out cost?
We charge $149 for a full diagnostic, credited to the repair if you proceed. No separate trip fee and no surcharges added later.
Can you come out same-day in Middleburg?
Yes. We cover Middleburg daily and offer same-day and emergency service. Booking earlier in the day gives the best chance of an afternoon slot.
What's the price for a Unox commercial range that is not heating?
Typical costs for a Unox commercial range that is not heating land between $200–$880, parts and labour included. The $149 call-out is applied to the job and the quote is flat — no meter running.
What if the same problem comes back?
Every repair is backed by a 1-year labour warranty and a 6-month parts warranty. If the same issue returns in that window, we come back at no charge.
Get same-day service in Middleburg.
Flat-rate pricing, 1 year labour warranty, and fast dispatch.