Frymaster Deep Fryer Burner Not Igniting in Orange Park, FL
Surface burner clicks but no flame, or no spark at all. Igniter, spark module, or gas valve. We fix this on Frymaster deep fryers across Orange Park. Urgent breakdowns get priority dispatch, so they don't wait until morning.
Why your Frymaster deep fryer is burner not igniting
On a Frymaster deep fryer, burner not igniting usually announces itself like this: surface burner clicks but no flame, or no spark at all. Igniter, spark module, or gas valve. More often than not it traces back to a weak spark electrode. Left unaddressed, the kitchen loses a station it can't work around.
Most likely causes
- A dirty or wet igniter
- A faulty gas valve
- A weak spark electrode
- Clogged burner ports
- Failed spark module
Known Frymaster deep fryer weak points
- contactor or heating-element failure on electric models causing no heat
- high-limit thermostat trips from overheated oil or a failed probe
- filter pump motor overheating or clogged pick-up tube O-rings letting the pump draw air
- temperature probe / controller (computer) faults giving erratic temperatures
Quick check — and when it's not DIY
One thing you can rule out on your own: check whether other burners on the same unit ignite normally, which narrows the fault to one burner or the whole unit. Once you've ruled that out, if it still won't spark, the igniter, spark module, or gas valve is at fault, and gas components aren't a homeowner repair by code in most areas.
How we fix it
Our technician runs a full diagnostic on your Frymaster deep fryer and isolates the exact cause before quoting. OEM parts are readily available through the Frymaster/Ali Group network and Parts Town; gas fryer work requires a licensed gas technician and high-limit/electrical repairs a qualified tech. The quote is flat, approved before we start, and every repair carries our warranty.
Independent commercial service experienced with Frymaster fryers; not authorized by the manufacturer.
What Orange Park homeowners say
on the First Coast
“They squeezed our Frymaster deep fryer in on a busy day and still showed up inside the window. They clearly knew Frymaster inside out and had the part on the truck.”
“No waiting around — the Frymaster deep fryer was diagnosed within an hour of the tech arriving. Clean, on-time, and they took the old part with them. Would call again.”
“The Frymaster deep fryer died mid-week and they had it sorted before I'd even rearranged my schedule. Genuine parts, done in one trip, and the invoice matched the quote.”
Other Frymaster deep fryer problems we fix
Frequently asked questions
What if the same problem comes back?
We stand behind the work with a 1-year labour warranty and 6-month parts warranty — if it recurs in that time, we fix it again for free.
What does a Frymaster deep fryer that is burner not igniting usually cost?
Typical costs for a Frymaster deep fryer that is burner not igniting land between $200–$880, parts and labour included. The $149 call-out is applied to the job and the quote is flat — no meter running.
Can you come out same-day in Orange Park?
Same-day is common in Orange Park. Our trucks run the area every day and emergency slots are held open for breakdowns that can't wait.
What does the call-out cost?
We charge $149 for a full diagnostic, credited to the repair if you proceed. No separate trip fee and no surcharges added later.
Get same-day service in Orange Park.
Flat-rate pricing, 1 year labour warranty, and fast dispatch.