Hobart Commercial Dishwasher Won't Start in St. Augustine, FL
Unit completely dead, no lights, no response. Door switch, control board, or power issue. We fix this on Hobart commercial dishwashers across St. Augustine. Weekend and evening slots are available when a weekday won't do.
Why your Hobart commercial dishwasher is won't start
Catching won't start early on a Hobart commercial dishwasher is usually straightforward: unit completely dead, no lights, no response. Door switch, control board, or power issue. On this platform it's most often a blown line fuse. Left unaddressed, laundry backs up fast.
Most likely causes
- Faulty door switch or interlock
- A blown line fuse
- Tripped thermal protector
- A power supply or wiring fault
Known Hobart commercial dishwasher weak points
- wash/rinse arm clogging and scale buildup reducing wash quality
- booster heater and rinse heating element failures causing low sanitizing temperatures
- wash pump motor/seal leaks and drain-valve issues
- door interlock switch and fill/float valve failures
Quick check — and when it's not DIY
Start here — it costs nothing and rules out the easy cause: check the outlet and breaker, and confirm the door is fully closed and latched — many units won't start at all with a door safety switch tripped. Also, try a different outlet if one's available, to rule out a dead circuit rather than the unit itself. When that isn't the fix, if power and the door are both fine, the fault is in the control board or start circuit, and testing that safely means working inside a live electrical panel.
How we fix it
First we diagnose the Hobart commercial dishwasher end to end, so you're not paying to swap parts on a guess. Genuine Hobart parts and OEM service kits are widely available; electrical, plumbing, and booster/gas connections must meet local code and be handled by a qualified technician. Most won't start jobs finish same-day, at a flat price, under our warranty.
Independent commercial service experienced with Hobart warewashing equipment; not an authorized Hobart dealer.
What St. Augustine homeowners say
on the First Coast
“Same-day response — a tech was diagnosing the Hobart commercial dishwasher hours after I called. No runaround — they told me honestly what it needed and fixed just that.”
“They squeezed our Hobart commercial dishwasher in on a busy day and still showed up inside the window. The tech explained exactly what went wrong before touching anything.”
“Our Hobart commercial dishwasher quit on us and they had a technician out the same afternoon in St. Augustine. Fair price, no surprise fees, and the Hobart commercial dishwasher has worked perfectly since.”
Hobart Commercial Dishwasher repair nearby
Frequently asked questions
Is there a fee for the diagnostic?
We charge $149 for a full diagnostic, credited to the repair if you proceed. No separate trip fee and no surcharges added later.
What if the same problem comes back?
We stand behind the work with a 1-year labour warranty and 6-month parts warranty — if it recurs in that time, we fix it again for free.
What does a Hobart commercial dishwasher that is won't start usually cost?
Most repairs for a Hobart commercial dishwasher that is won't start run $190–$720 including parts and labour. The $149 diagnostic is credited in full toward the repair when you go ahead, and you get a flat quote before any work starts.
Can you come out same-day in St. Augustine?
Same-day is common in St. Augustine. Our trucks run the area every day and emergency slots are held open for breakdowns that can't wait.
Get same-day service in St. Augustine.
Flat-rate pricing, 1 year labour warranty, and fast dispatch.