Hobart Commercial Dishwasher Not Draining in Fernandina Beach, FL
Water pools at the bottom of the tub. Usually drain pump, clog, or check-valve. We fix this on Hobart commercial dishwashers across Fernandina Beach. Most jobs are booked, diagnosed, and fixed inside 24 hours.

Why your Hobart commercial dishwasher is not draining
A Hobart commercial dishwasher that is not draining tends to show the same signs: water pools at the bottom of the tub. Usually drain pump, clog, or check-valve. The usual culprit is control board not signalling the pump. Left unaddressed, laundry backs up fast.
Most likely causes
- Debris jamming the impeller
- Kinked or blocked drain hose
- Clogged drain pump or filter
- A stuck check valve
- Control board not signalling the pump
Known Hobart commercial dishwasher weak points
- wash/rinse arm clogging and scale buildup reducing wash quality
- booster heater and rinse heating element failures causing low sanitizing temperatures
- wash pump motor/seal leaks and drain-valve issues
- door interlock switch and fill/float valve failures
Quick check — and when it's not DIY
Start here — it costs nothing and rules out the easy cause: check whether the unit is sitting level, since a strong tilt alone can stop proper draining. Beyond that, if it still won't drain, the pump or an internal valve has likely failed, and opening the unit yourself can void the manufacturer's warranty.
How we fix it
Our technician runs a full diagnostic on your Hobart commercial dishwasher and isolates the exact cause before quoting. Genuine Hobart parts and OEM service kits are widely available; electrical, plumbing, and booster/gas connections must meet local code and be handled by a qualified technician. The quote is flat, approved before we start, and every repair carries our warranty.
Independent commercial service experienced with Hobart warewashing equipment; not an authorized Hobart dealer.
What Fernandina Beach homeowners say
on the First Coast
“Called late at night and a tech was here by mid-morning to look at the Hobart commercial dishwasher. You can tell they work on Hobart all the time — quick, clean diagnosis.”
“Called about our Hobart commercial dishwasher in the morning and it was running again by evening. Genuine Hobart part, flat price, and done in a single visit.”
“Our Hobart commercial dishwasher quit on us and they had a technician out the same afternoon in Fernandina Beach. Fixed on the first visit — the flat price matched the quote exactly, no upsell.”
Frequently asked questions
Can you come out same-day in Fernandina Beach?
We do — Fernandina Beach is on our daily route, with same-day and after-hours emergency slots. The earlier you call, the better the odds of a same-day visit.
Do you warranty your repairs?
You're covered by our 1-year labour warranty and 6-month parts warranty. Should the same fault return inside that period, the follow-up visit is free.
How much does a Hobart commercial dishwasher that is not draining cost?
Most repairs for a Hobart commercial dishwasher that is not draining run $190–$720 including parts and labour. The $149 diagnostic is credited in full toward the repair when you go ahead, and you get a flat quote before any work starts.
What does the call-out cost?
A flat $149 covers the on-site diagnosis and rolls into the repair price. What we quote is what you pay — no add-ons.
Get same-day service in Fernandina Beach.
Flat-rate pricing, 1 year labour warranty, and fast dispatch.