Hobart Commercial Dishwasher Not Draining in Lakeside, FL
Water pools at the bottom of the tub. Usually drain pump, clog, or check-valve. We fix this on Hobart commercial dishwashers across Lakeside. Call before noon and there's a good chance of a same-day visit.
Why your Hobart commercial dishwasher is not draining
On a Hobart commercial dishwasher, not draining usually announces itself like this: water pools at the bottom of the tub. Usually drain pump, clog, or check-valve. The usual culprit is debris jamming the impeller. Left unaddressed, laundry backs up fast.
Most likely causes
- Control board not signalling the pump
- Kinked or blocked drain hose
- Clogged drain pump or filter
Known Hobart commercial dishwasher weak points
- wash/rinse arm clogging and scale buildup reducing wash quality
- booster heater and rinse heating element failures causing low sanitizing temperatures
- wash pump motor/seal leaks and drain-valve issues
- door interlock switch and fill/float valve failures
Quick check — and when it's not DIY
Before booking a repair, check whether the unit is sitting level, since a strong tilt alone can stop proper draining. Also, check the drain hose isn't kinked or blocked and clear any visible debris from an accessible filter. If it's still acting up after that, if it still won't drain, the pump or an internal valve has likely failed, and opening the unit yourself can void the manufacturer's warranty.
How we fix it
An experienced tech tests the Hobart commercial dishwasher systematically and pinpoints what's actually causing the not draining. Genuine Hobart parts and OEM service kits are widely available; electrical, plumbing, and booster/gas connections must meet local code and be handled by a qualified technician. The quote is flat, approved before we start, and every repair carries our warranty.
Independent commercial service experienced with Hobart warewashing equipment; not an authorized Hobart dealer.
What Lakeside homeowners say
on the First Coast
“The Hobart commercial dishwasher broke right before the weekend and they still came out same-day. No runaround — they told me honestly what it needed and fixed just that.”
“Two other shops couldn't fit us in — these guys fixed the Hobart commercial dishwasher the same day. The tech explained exactly what went wrong before touching anything.”
“They squeezed our Hobart commercial dishwasher in on a busy day and still showed up inside the window. Fair price, no surprise fees, and the Hobart commercial dishwasher has worked perfectly since.”
Frequently asked questions
What if the same problem comes back?
You're covered by our 1-year labour warranty and 6-month parts warranty. Should the same fault return inside that period, the follow-up visit is free.
Do you charge for the estimate?
A flat $149 covers the on-site diagnosis and rolls into the repair price. What we quote is what you pay — no add-ons.
How much does a Hobart commercial dishwasher that is not draining cost?
Most repairs for a Hobart commercial dishwasher that is not draining run $190–$720 including parts and labour. The $149 diagnostic is credited in full toward the repair when you go ahead, and you get a flat quote before any work starts.
Do you offer same-day service in Lakeside?
Same-day is common in Lakeside. Our trucks run the area every day and emergency slots are held open for breakdowns that can't wait.
Get same-day service in Lakeside.
Flat-rate pricing, 1 year labour warranty, and fast dispatch.