Primus Commercial Dryer Not Heating in Fernandina Beach, FL
Appliance runs but doesn't reach set temperature. Failed heating element, igniter, or thermal fuse. We fix this on Primus commercial dryers across Fernandina Beach. Typical response time in this area is under an hour once you're on the schedule.
Why your Primus commercial dryer is not heating
A Primus commercial dryer that is not heating tends to show the same signs: appliance runs but doesn't reach set temperature. Failed heating element, igniter, or thermal fuse. More often than not it traces back to failed igniter or gas valve. Left unaddressed, laundry backs up fast.
Most likely causes
- Faulty temperature sensor
- Failed igniter or gas valve
- Burned-out heating element
- A broken door switch cutting the heat circuit
- Tripped thermal fuse
Known Primus commercial dryer weak points
- door lock/interlock failures
- drain valve faults
- drum bearing wear and out-of-balance vibration
- inverter/VFD faults and gas dryer no-heat (igniter/gas valve) with lint/airflow issues
Quick check — and when it's not DIY
Start here — it costs nothing and rules out the easy cause: confirm the commercial dryer has power, any gas supply valve is open, and a simple reset — power off 60 seconds, back on — doesn't restore heat. Also, check whether an ignition click or spark is audible at all when it should be heating. Beyond that, no spark or flame usually means the igniter or gas valve itself has failed, and gas-carrying parts are restricted to licensed work in most jurisdictions.
How we fix it
Our technician runs a full diagnostic on your Primus commercial dryer and isolates the exact cause before quoting. OEM parts are available through the Alliance Laundry Systems distributor network; gas heating and electrical work should be handled by a licensed technician. The quote is flat, approved before we start, and every repair carries our warranty.
independent commercial service experienced with Primus commercial laundry equipment; not authorized by or affiliated with the manufacturer
What Fernandina Beach homeowners say
on the First Coast
“Two other shops couldn't fit us in — these guys fixed the Primus commercial dryer the same day. They clearly knew Primus inside out and had the part on the truck.”
“Called late at night and a tech was here by mid-morning to look at the Primus commercial dryer. Clean, on-time, and they took the old part with them. Would call again.”
“No waiting around — the Primus commercial dryer was diagnosed within an hour of the tech arriving. Genuine parts, done in one trip, and the invoice matched the quote.”
Other Primus commercial dryer problems we fix
Frequently asked questions
How much does a Primus commercial dryer that is not heating cost?
Typical costs for a Primus commercial dryer that is not heating land between $190–$680, parts and labour included. The $149 call-out is applied to the job and the quote is flat — no meter running.
What if the same problem comes back?
Every repair is backed by a 1-year labour warranty and a 6-month parts warranty. If the same issue returns in that window, we come back at no charge.
Is there a fee for the diagnostic?
We charge $149 for a full diagnostic, credited to the repair if you proceed. No separate trip fee and no surcharges added later.
Can you come out same-day in Fernandina Beach?
Yes. We cover Fernandina Beach daily and offer same-day and emergency service. Booking earlier in the day gives the best chance of an afternoon slot.
Get same-day service in Fernandina Beach.
Flat-rate pricing, 1 year labour warranty, and fast dispatch.