Imperial Commercial Range Burner Not Igniting in Fruit Cove, FL
Surface burner clicks but no flame, or no spark at all. Igniter, spark module, or gas valve. We fix this on Imperial commercial ranges across Fruit Cove. Call before noon and there's a good chance of a same-day visit.
Why your Imperial commercial range is burner not igniting
The first things owners spot on a burner not igniting Imperial commercial range: surface burner clicks but no flame, or no spark at all. Igniter, spark module, or gas valve. The usual culprit is a faulty gas valve. Left unaddressed, the kitchen loses a station it can't work around.
Most likely causes
- Failed spark module
- A weak spark electrode
- A faulty gas valve
- A dirty or wet igniter
- Loose igniter wiring
Known Imperial commercial range weak points
- standing-pilot and thermocouple failures preventing burner ignition
- burner valve and orifice wear causing weak or uneven flame
- oven and fryer thermostat drift affecting temperature accuracy
- griddle plate warping and thermostat faults over heavy use
Quick check — and when it's not DIY
One thing you can rule out on your own: confirm the burner ports and igniter are dry and free of spilled food or debris. Also, check whether other burners on the same unit ignite normally, which narrows the fault to one burner or the whole unit. If it's still acting up after that, a gas valve or spark module fault means working on live gas and ignition components, which is licensed work in most areas.
How we fix it
An experienced tech tests the Imperial commercial range systematically and pinpoints what's actually causing the burner not igniting. OEM parts are available (Imperial is now Middleby-owned) through Parts Town and PartsFPS; gas work requires a licensed technician. The quote is flat, approved before we start, and every repair carries our warranty.
Independent commercial service experienced with Imperial cooking equipment; not authorized by the manufacturer.
What Fruit Cove homeowners say
on the First Coast
“The Imperial commercial range died mid-week and they had it sorted before I'd even rearranged my schedule. You can tell they work on Imperial all the time — quick, clean diagnosis.”
“Same-day response — a tech was diagnosing the Imperial commercial range hours after I called. Genuine Imperial part, flat price, and done in a single visit.”
“They squeezed our Imperial commercial range in on a busy day and still showed up inside the window. Fixed on the first visit — the flat price matched the quote exactly, no upsell.”
Other Imperial commercial range problems we fix
Frequently asked questions
What does a Imperial commercial range that is burner not igniting usually cost?
Typical costs for a Imperial commercial range that is burner not igniting land between $200–$880, parts and labour included. The $149 call-out is applied to the job and the quote is flat — no meter running.
What if the same problem comes back?
We stand behind the work with a 1-year labour warranty and 6-month parts warranty — if it recurs in that time, we fix it again for free.
Do you offer same-day service in Fruit Cove?
Same-day is common in Fruit Cove. Our trucks run the area every day and emergency slots are held open for breakdowns that can't wait.
Do you charge for the estimate?
We charge $149 for a full diagnostic, credited to the repair if you proceed. No separate trip fee and no surcharges added later.
Get same-day service in Fruit Cove.
Flat-rate pricing, 1 year labour warranty, and fast dispatch.