Blodgett Commercial Oven Not Heating in Jacksonville Beach, FL
Appliance runs but doesn't reach set temperature. Failed heating element, igniter, or thermal fuse. We fix this on Blodgett commercial ovens across Jacksonville Beach. Weekend and evening slots are available when a weekday won't do.
Why your Blodgett commercial oven is not heating
When a Blodgett commercial oven is not heating, here's what you'll usually notice: appliance runs but doesn't reach set temperature. Failed heating element, igniter, or thermal fuse. The usual culprit is a broken door switch cutting the heat circuit. Left unaddressed, the kitchen loses a station it can't work around.
Most likely causes
- Failed igniter or gas valve
- Tripped thermal fuse
- Burned-out heating element
Known Blodgett commercial oven weak points
- convection blower motor and bearing failures
- door gasket wear and hinge/spring failures causing heat loss
- spark igniter/ignition module and gas valve faults on gas models
- thermostat/temperature calibration drift and contactor failures on electric models
Quick check — and when it's not DIY
Do this first — it takes two minutes: confirm the commercial oven has power, any gas supply valve is open, and a simple reset — power off 60 seconds, back on — doesn't restore heat. Also, check whether an ignition click or spark is audible at all when it should be heating. Past that point, heating elements, igniters, and gas valves combine high current or combustible gas, and that combination is a licensed-technician job, not a home fix.
How we fix it
An experienced tech tests the Blodgett commercial oven systematically and pinpoints what's actually causing the not heating. OEM Blodgett/Middleby parts are widely available; gas ignition and valve work requires a licensed technician per local code. You approve a flat price up front, and the work is backed by our labour and parts warranty.
Independent commercial service experienced with Blodgett ovens; not an authorized Blodgett dealer.
What Jacksonville Beach homeowners say
on the First Coast
“Our Blodgett commercial oven quit on us and they had a technician out the same afternoon in Jacksonville Beach. They clearly knew Blodgett inside out and had the part on the truck.”
“The Blodgett commercial oven died mid-week and they had it sorted before I'd even rearranged my schedule. Clean, on-time, and they took the old part with them. Would call again.”
“Called late at night and a tech was here by mid-morning to look at the Blodgett commercial oven. Genuine parts, done in one trip, and the invoice matched the quote.”
Frequently asked questions
How fast can you get to Jacksonville Beach?
Same-day is common in Jacksonville Beach. Our trucks run the area every day and emergency slots are held open for breakdowns that can't wait.
What does the call-out cost?
We charge $149 for a full diagnostic, credited to the repair if you proceed. No separate trip fee and no surcharges added later.
What if the same problem comes back?
We stand behind the work with a 1-year labour warranty and 6-month parts warranty — if it recurs in that time, we fix it again for free.
How much does a Blodgett commercial oven that is not heating cost?
Expect $200–$880 for parts and labour on a Blodgett commercial oven that is not heating. We charge a $149 diagnostic that comes off the repair total, and nothing begins until you approve a flat price.
Get same-day service in Jacksonville Beach.
Flat-rate pricing, 1 year labour warranty, and fast dispatch.