Frymaster Deep Fryer Burner Not Igniting in Jacksonville, FL
Surface burner clicks but no flame, or no spark at all. Igniter, spark module, or gas valve. We fix this on Frymaster deep fryers across Jacksonville. Call before noon and there's a good chance of a same-day visit.
Why your Frymaster deep fryer is burner not igniting
Catching burner not igniting early on a Frymaster deep fryer is usually straightforward: surface burner clicks but no flame, or no spark at all. Igniter, spark module, or gas valve. More often than not it traces back to a dirty or wet igniter. Left unaddressed, the kitchen loses a station it can't work around.
Most likely causes
- A weak spark electrode
- A dirty or wet igniter
- Loose igniter wiring
Known Frymaster deep fryer weak points
- contactor or heating-element failure on electric models causing no heat
- high-limit thermostat trips from overheated oil or a failed probe
- filter pump motor overheating or clogged pick-up tube O-rings letting the pump draw air
- temperature probe / controller (computer) faults giving erratic temperatures
Quick check — and when it's not DIY
One thing you can rule out on your own: check whether other burners on the same unit ignite normally, which narrows the fault to one burner or the whole unit. If that doesn't fix it, if it still won't spark, the igniter, spark module, or gas valve is at fault, and gas components aren't a homeowner repair by code in most areas.
How we fix it
Our technician runs a full diagnostic on your Frymaster deep fryer and isolates the exact cause before quoting. OEM parts are readily available through the Frymaster/Ali Group network and Parts Town; gas fryer work requires a licensed gas technician and high-limit/electrical repairs a qualified tech. The quote is flat, approved before we start, and every repair carries our warranty.
Independent commercial service experienced with Frymaster fryers; not authorized by the manufacturer.
What Jacksonville homeowners say
on the First Coast
“Same-day response — a tech was diagnosing the Frymaster deep fryer hours after I called. They clearly knew Frymaster inside out and had the part on the truck.”
“They squeezed our Frymaster deep fryer in on a busy day and still showed up inside the window. Clean, on-time, and they took the old part with them. Would call again.”
“Our Frymaster deep fryer quit on us and they had a technician out the same afternoon in Jacksonville. Genuine parts, done in one trip, and the invoice matched the quote.”
Other Frymaster deep fryer problems we fix
Frequently asked questions
Can you come out same-day in Jacksonville?
Same-day is common in Jacksonville. Our trucks run the area every day and emergency slots are held open for breakdowns that can't wait.
What if the same problem comes back?
We stand behind the work with a 1-year labour warranty and 6-month parts warranty — if it recurs in that time, we fix it again for free.
What does the call-out cost?
The $149 diagnostic covers a full on-site inspection and is applied to your repair total. There are no hidden trip charges or surcharges on top of your quote.
What's the price for a Frymaster deep fryer that is burner not igniting?
Expect $200–$880 for parts and labour on a Frymaster deep fryer that is burner not igniting. We charge a $149 diagnostic that comes off the repair total, and nothing begins until you approve a flat price.
Get same-day service in Jacksonville.
Flat-rate pricing, 1 year labour warranty, and fast dispatch.