Hobart Commercial Range Not Heating in Jacksonville, FL
Appliance runs but doesn't reach set temperature. Failed heating element, igniter, or thermal fuse. We fix this on Hobart commercial ranges across Jacksonville. Urgent breakdowns get priority dispatch, so they don't wait until morning.
Why your Hobart commercial range is not heating
When a Hobart commercial range is not heating, here's what you'll usually notice: appliance runs but doesn't reach set temperature. Failed heating element, igniter, or thermal fuse. Nine times out of ten it comes down to a bad control board. Left unaddressed, the kitchen loses a station it can't work around.
Most likely causes
- A bad control board
- Failed igniter or gas valve
- Faulty temperature sensor
Known Hobart commercial range weak points
- wash/rinse arm clogging and scale buildup reducing wash quality
- booster heater and rinse heating element failures causing low sanitizing temperatures
- wash pump motor/seal leaks and drain-valve issues
- door interlock switch and fill/float valve failures
Quick check — and when it's not DIY
One thing you can rule out on your own: check whether an ignition click or spark is audible at all when it should be heating. Past that point, heating elements, igniters, and gas valves combine high current or combustible gas, and that combination is a licensed-technician job, not a home fix.
How we fix it
An experienced tech tests the Hobart commercial range systematically and pinpoints what's actually causing the not heating. Genuine Hobart parts and OEM service kits are widely available; electrical, plumbing, and booster/gas connections must meet local code and be handled by a qualified technician. The quote is flat, approved before we start, and every repair carries our warranty.
Independent commercial service experienced with Hobart warewashing equipment; not an authorized Hobart dealer.
What Jacksonville homeowners say
on the First Coast
“Called late at night and a tech was here by mid-morning to look at the Hobart commercial range. No runaround — they told me honestly what it needed and fixed just that.”
“Called about our Hobart commercial range in the morning and it was running again by evening. The tech explained exactly what went wrong before touching anything.”
“The Hobart commercial range broke right before the weekend and they still came out same-day. Fair price, no surprise fees, and the Hobart commercial range has worked perfectly since.”
Other Hobart commercial range problems we fix
Frequently asked questions
How fast can you get to Jacksonville?
We do — Jacksonville is on our daily route, with same-day and after-hours emergency slots. The earlier you call, the better the odds of a same-day visit.
Is the repair guaranteed?
You're covered by our 1-year labour warranty and 6-month parts warranty. Should the same fault return inside that period, the follow-up visit is free.
Do you charge for the estimate?
The $149 diagnostic covers a full on-site inspection and is applied to your repair total. There are no hidden trip charges or surcharges on top of your quote.
What's the price for a Hobart commercial range that is not heating?
Typical costs for a Hobart commercial range that is not heating land between $200–$880, parts and labour included. The $149 call-out is applied to the job and the quote is flat — no meter running.
Get same-day service in Jacksonville.
Flat-rate pricing, 1 year labour warranty, and fast dispatch.