Blodgett Combi Oven Not Heating in Lakeside, FL
Appliance runs but doesn't reach set temperature. Failed heating element, igniter, or thermal fuse. We fix this on Blodgett combi ovens across Lakeside. Most calls get a same-day slot — our vans cover this area daily.
Why your Blodgett combi oven is not heating
On a Blodgett combi oven, not heating usually announces itself like this: appliance runs but doesn't reach set temperature. Failed heating element, igniter, or thermal fuse. Nine times out of ten it comes down to burned-out heating element. Left unaddressed, the kitchen loses a station it can't work around.
Most likely causes
- A broken door switch cutting the heat circuit
- A bad control board
- Failed igniter or gas valve
- Faulty temperature sensor
- Burned-out heating element
Known Blodgett combi oven weak points
- convection blower motor and bearing failures
- door gasket wear and hinge/spring failures causing heat loss
- spark igniter/ignition module and gas valve faults on gas models
- thermostat/temperature calibration drift and contactor failures on electric models
Quick check — and when it's not DIY
The one self-check that's actually worth your time: confirm the combi oven has power, any gas supply valve is open, and a simple reset — power off 60 seconds, back on — doesn't restore heat. Should that not clear it, no spark or flame usually means the igniter or gas valve itself has failed, and gas-carrying parts are restricted to licensed work in most jurisdictions.
How we fix it
We start with a full diagnostic on the Blodgett combi oven, confirm the real fault, then price it flat. OEM Blodgett/Middleby parts are widely available; gas ignition and valve work requires a licensed technician per local code. The quote is flat, approved before we start, and every repair carries our warranty.
Independent commercial service experienced with Blodgett ovens; not an authorized Blodgett dealer.
What Lakeside homeowners say
on the First Coast
“No waiting around — the Blodgett combi oven was diagnosed within an hour of the tech arriving. Clean, on-time, and they took the old part with them. Would call again.”
“They squeezed our Blodgett combi oven in on a busy day and still showed up inside the window. Fixed on the first visit — the flat price matched the quote exactly, no upsell.”
“Same-day response — a tech was diagnosing the Blodgett combi oven hours after I called. Flat price agreed up front, and they stood behind the labour warranty.”
Other Blodgett combi oven problems we fix
Frequently asked questions
How fast can you get to Lakeside?
Yes. We cover Lakeside daily and offer same-day and emergency service. Booking earlier in the day gives the best chance of an afternoon slot.
What does a Blodgett combi oven that is not heating usually cost?
Most repairs for a Blodgett combi oven that is not heating run $200–$880 including parts and labour. The $149 diagnostic is credited in full toward the repair when you go ahead, and you get a flat quote before any work starts.
Is the repair guaranteed?
You're covered by our 1-year labour warranty and 6-month parts warranty. Should the same fault return inside that period, the follow-up visit is free.
What does the call-out cost?
The $149 diagnostic covers a full on-site inspection and is applied to your repair total. There are no hidden trip charges or surcharges on top of your quote.
Get same-day service in Lakeside.
Flat-rate pricing, 1 year labour warranty, and fast dispatch.