Blodgett Commercial Range Not Heating in Middleburg, FL
Appliance runs but doesn't reach set temperature. Failed heating element, igniter, or thermal fuse. We fix this on Blodgett commercial ranges across Middleburg. A live dispatcher answers your call — no phone tree, no callback queue.
Why your Blodgett commercial range is not heating
Here's how not heating typically presents on a Blodgett commercial range: appliance runs but doesn't reach set temperature. Failed heating element, igniter, or thermal fuse. The usual culprit is tripped thermal fuse. Left unaddressed, the kitchen loses a station it can't work around.
Most likely causes
- A broken door switch cutting the heat circuit
- Faulty temperature sensor
- Failed igniter or gas valve
- Tripped thermal fuse
- Burned-out heating element
Known Blodgett commercial range weak points
- convection blower motor and bearing failures
- door gasket wear and hinge/spring failures causing heat loss
- spark igniter/ignition module and gas valve faults on gas models
- thermostat/temperature calibration drift and contactor failures on electric models
Quick check — and when it's not DIY
There's one thing worth checking before you book anyone: confirm the commercial range has power, any gas supply valve is open, and a simple reset — power off 60 seconds, back on — doesn't restore heat. Also, check whether an ignition click or spark is audible at all when it should be heating. Past that point, heating elements, igniters, and gas valves combine high current or combustible gas, and that combination is a licensed-technician job, not a home fix.
How we fix it
Our technician runs a full diagnostic on your Blodgett commercial range and isolates the exact cause before quoting. OEM Blodgett/Middleby parts are widely available; gas ignition and valve work requires a licensed technician per local code. The quote is flat, approved before we start, and every repair carries our warranty.
Independent commercial service experienced with Blodgett ovens; not an authorized Blodgett dealer.
What Middleburg homeowners say
on the First Coast
“Same-day response — a tech was diagnosing the Blodgett commercial range hours after I called. Stood behind the warranty and used a real Blodgett OEM part, not a knockoff.”
“The Blodgett commercial range died mid-week and they had it sorted before I'd even rearranged my schedule. Fixed on the first visit — the flat price matched the quote exactly, no upsell.”
“Our Blodgett commercial range quit on us and they had a technician out the same afternoon in Middleburg. Genuine Blodgett part, flat price, and done in a single visit.”
Other Blodgett commercial range problems we fix
Frequently asked questions
Do you warranty your repairs?
We stand behind the work with a 1-year labour warranty and 6-month parts warranty — if it recurs in that time, we fix it again for free.
Do you offer same-day service in Middleburg?
Same-day is common in Middleburg. Our trucks run the area every day and emergency slots are held open for breakdowns that can't wait.
What's the price for a Blodgett commercial range that is not heating?
Most repairs for a Blodgett commercial range that is not heating run $200–$880 including parts and labour. The $149 diagnostic is credited in full toward the repair when you go ahead, and you get a flat quote before any work starts.
What does the call-out cost?
A flat $149 covers the on-site diagnosis and rolls into the repair price. What we quote is what you pay — no add-ons.
Get same-day service in Middleburg.
Flat-rate pricing, 1 year labour warranty, and fast dispatch.