Blodgett Commercial Range Not Heating in Neptune Beach, FL
Appliance runs but doesn't reach set temperature. Failed heating element, igniter, or thermal fuse. We fix this on Blodgett commercial ranges across Neptune Beach. Call early and a technician is usually at your door that same afternoon.
Why your Blodgett commercial range is not heating
Catching not heating early on a Blodgett commercial range is usually straightforward: appliance runs but doesn't reach set temperature. Failed heating element, igniter, or thermal fuse. On this platform it's most often a broken door switch cutting the heat circuit. Left unaddressed, the kitchen loses a station it can't work around.
Most likely causes
- Faulty temperature sensor
- Tripped thermal fuse
- Burned-out heating element
- Failed igniter or gas valve
Known Blodgett commercial range weak points
- convection blower motor and bearing failures
- door gasket wear and hinge/spring failures causing heat loss
- spark igniter/ignition module and gas valve faults on gas models
- thermostat/temperature calibration drift and contactor failures on electric models
Quick check — and when it's not DIY
Start here — it costs nothing and rules out the easy cause: check whether an ignition click or spark is audible at all when it should be heating. Also, confirm the commercial range has power, any gas supply valve is open, and a simple reset — power off 60 seconds, back on — doesn't restore heat. If it's still acting up after that, no spark or flame usually means the igniter or gas valve itself has failed, and gas-carrying parts are restricted to licensed work in most jurisdictions.
How we fix it
Our technician runs a full diagnostic on your Blodgett commercial range and isolates the exact cause before quoting. OEM Blodgett/Middleby parts are widely available; gas ignition and valve work requires a licensed technician per local code. You approve a flat price up front, and the work is backed by our labour and parts warranty.
Independent commercial service experienced with Blodgett ovens; not an authorized Blodgett dealer.
What Neptune Beach homeowners say
on the First Coast
“Same-day response — a tech was diagnosing the Blodgett commercial range hours after I called. Flat price agreed up front, and they stood behind the labour warranty.”
“The Blodgett commercial range died mid-week and they had it sorted before I'd even rearranged my schedule. Genuine parts, done in one trip, and the invoice matched the quote.”
“No waiting around — the Blodgett commercial range was diagnosed within an hour of the tech arriving. Clean, on-time, and they took the old part with them. Would call again.”
Other Blodgett commercial range problems we fix
Frequently asked questions
What if the same problem comes back?
Every repair is backed by a 1-year labour warranty and a 6-month parts warranty. If the same issue returns in that window, we come back at no charge.
Do you charge for the estimate?
A flat $149 covers the on-site diagnosis and rolls into the repair price. What we quote is what you pay — no add-ons.
How much does a Blodgett commercial range that is not heating cost?
Most repairs for a Blodgett commercial range that is not heating run $200–$880 including parts and labour. The $149 diagnostic is credited in full toward the repair when you go ahead, and you get a flat quote before any work starts.
Do you offer same-day service in Neptune Beach?
Same-day is common in Neptune Beach. Our trucks run the area every day and emergency slots are held open for breakdowns that can't wait.
Get same-day service in Neptune Beach.
Flat-rate pricing, 1 year labour warranty, and fast dispatch.