Blodgett Commercial Range Not Heating in Palm Valley, FL
Appliance runs but doesn't reach set temperature. Failed heating element, igniter, or thermal fuse. We fix this on Blodgett commercial ranges across Palm Valley. Typical response time in this area is under an hour once you're on the schedule.
Why your Blodgett commercial range is not heating
The first things owners spot on a not heating Blodgett commercial range: appliance runs but doesn't reach set temperature. Failed heating element, igniter, or thermal fuse. The usual culprit is failed igniter or gas valve. Left unaddressed, the kitchen loses a station it can't work around.
Most likely causes
- Burned-out heating element
- Faulty temperature sensor
- A broken door switch cutting the heat circuit
- A bad control board
- Tripped thermal fuse
Known Blodgett commercial range weak points
- convection blower motor and bearing failures
- door gasket wear and hinge/spring failures causing heat loss
- spark igniter/ignition module and gas valve faults on gas models
- thermostat/temperature calibration drift and contactor failures on electric models
Quick check — and when it's not DIY
Worth checking yourself first: confirm the commercial range has power, any gas supply valve is open, and a simple reset — power off 60 seconds, back on — doesn't restore heat. Also, check whether an ignition click or spark is audible at all when it should be heating. If that doesn't fix it, heating elements, igniters, and gas valves combine high current or combustible gas, and that combination is a licensed-technician job, not a home fix.
How we fix it
An experienced tech tests the Blodgett commercial range systematically and pinpoints what's actually causing the not heating. OEM Blodgett/Middleby parts are widely available; gas ignition and valve work requires a licensed technician per local code. You approve a flat price up front, and the work is backed by our labour and parts warranty.
Independent commercial service experienced with Blodgett ovens; not an authorized Blodgett dealer.
What Palm Valley homeowners say
on the First Coast
“Called about our Blodgett commercial range in the morning and it was running again by evening. They clearly knew Blodgett inside out and had the part on the truck.”
“Our Blodgett commercial range quit on us and they had a technician out the same afternoon in Palm Valley. Clean, on-time, and they took the old part with them. Would call again.”
“Two other shops couldn't fit us in — these guys fixed the Blodgett commercial range the same day. Genuine parts, done in one trip, and the invoice matched the quote.”
Other Blodgett commercial range problems we fix
Blodgett Commercial Range repair nearby
Frequently asked questions
Is there a fee for the diagnostic?
The $149 diagnostic covers a full on-site inspection and is applied to your repair total. There are no hidden trip charges or surcharges on top of your quote.
How much does a Blodgett commercial range that is not heating cost?
Expect $200–$880 for parts and labour on a Blodgett commercial range that is not heating. We charge a $149 diagnostic that comes off the repair total, and nothing begins until you approve a flat price.
What if the same problem comes back?
We stand behind the work with a 1-year labour warranty and 6-month parts warranty — if it recurs in that time, we fix it again for free.
How fast can you get to Palm Valley?
Same-day is common in Palm Valley. Our trucks run the area every day and emergency slots are held open for breakdowns that can't wait.
Get same-day service in Palm Valley.
Flat-rate pricing, 1 year labour warranty, and fast dispatch.