Traulsen Blast Chiller Compressor Failure in Neptune Beach, FL
Compressor clicks on then stops, or won't start. Often refrigerant or start relay related. We fix this on Traulsen blast chillers across Neptune Beach. Call early and a technician is usually at your door that same afternoon.
Why your Traulsen blast chiller is compressor failure
Here's how compressor failure typically presents on a Traulsen blast chiller: compressor clicks on then stops, or won't start. Often refrigerant or start relay related. Nine times out of ten it comes down to failed start relay or capacitor. Left unaddressed, food or stock can spoil within hours.
Most likely causes
- An electrical short in the windings
- A seized compressor
- An overheated overload protector
- Refrigerant charge loss
Known Traulsen blast chiller weak points
- door hinge and gasket wear on heavy stainless doors
- evaporator icing and defrost heater/timer failures
- electronic controller (Intela-Traul/legacy) faults
- condenser fan motor and dirty condenser causing temperature rise
Quick check — and when it's not DIY
There's one thing worth checking before you book anyone: listen for a hum with no start, or a repeated clicking sound, and confirm the unit is actually getting power. Also, check the breaker hasn't tripped and the unit's overload protector hasn't kicked out, since both can look like a dead compressor. If none of that changes anything, confirming an actual seized compressor versus a tripped protector needs an amp reading, and swapping a compressor means recovering and recharging refrigerant safely, which takes an experienced technician.
How we fix it
Our technician runs a full diagnostic on your Traulsen blast chiller and isolates the exact cause before quoting. Genuine Traulsen/ITW parts are available through distributors; refrigerant/sealed-system repairs require an experienced technician. Most compressor failure jobs finish same-day, at a flat price, under our warranty.
Independent commercial service experienced with Traulsen refrigeration; not an authorized Traulsen dealer.
What Neptune Beach homeowners say
on the First Coast
“The Traulsen blast chiller broke right before the weekend and they still came out same-day. They clearly knew Traulsen inside out and had the part on the truck.”
“Two other shops couldn't fit us in — these guys fixed the Traulsen blast chiller the same day. Clean, on-time, and they took the old part with them. Would call again.”
“They squeezed our Traulsen blast chiller in on a busy day and still showed up inside the window. Genuine parts, done in one trip, and the invoice matched the quote.”
Other Traulsen blast chiller problems we fix
Frequently asked questions
What does a Traulsen blast chiller that is compressor failure usually cost?
Typical costs for a Traulsen blast chiller that is compressor failure land between $280–$1,495, parts and labour included. The $149 call-out is applied to the job and the quote is flat — no meter running.
Is the repair guaranteed?
We stand behind the work with a 1-year labour warranty and 6-month parts warranty — if it recurs in that time, we fix it again for free.
What does the call-out cost?
The $149 diagnostic covers a full on-site inspection and is applied to your repair total. There are no hidden trip charges or surcharges on top of your quote.
Do you offer same-day service in Neptune Beach?
We do — Neptune Beach is on our daily route, with same-day and after-hours emergency slots. The earlier you call, the better the odds of a same-day visit.
Get same-day service in Neptune Beach.
Flat-rate pricing, 1 year labour warranty, and fast dispatch.