Hobart Commercial Range Burner Not Igniting in Yulee, FL
Surface burner clicks but no flame, or no spark at all. Igniter, spark module, or gas valve. We fix this on Hobart commercial ranges across Yulee. Typical response time in this area is under an hour once you're on the schedule.
Why your Hobart commercial range is burner not igniting
When a Hobart commercial range is burner not igniting, here's what you'll usually notice: surface burner clicks but no flame, or no spark at all. Igniter, spark module, or gas valve. The usual culprit is a dirty or wet igniter. Left unaddressed, the kitchen loses a station it can't work around.
Most likely causes
- Failed spark module
- Loose igniter wiring
- A weak spark electrode
- Clogged burner ports
- A faulty gas valve
Known Hobart commercial range weak points
- wash/rinse arm clogging and scale buildup reducing wash quality
- booster heater and rinse heating element failures causing low sanitizing temperatures
- wash pump motor/seal leaks and drain-valve issues
- door interlock switch and fill/float valve failures
Quick check — and when it's not DIY
Before you call anyone, confirm the burner ports and igniter are dry and free of spilled food or debris. Also, check whether other burners on the same unit ignite normally, which narrows the fault to one burner or the whole unit. When that isn't the fix, if it still won't spark, the igniter, spark module, or gas valve is at fault, and gas components aren't a homeowner repair by code in most areas.
How we fix it
An experienced tech tests the Hobart commercial range systematically and pinpoints what's actually causing the burner not igniting. Genuine Hobart parts and OEM service kits are widely available; electrical, plumbing, and booster/gas connections must meet local code and be handled by a qualified technician. Most burner not igniting jobs finish same-day, at a flat price, under our warranty.
Independent commercial service experienced with Hobart warewashing equipment; not an authorized Hobart dealer.
What Yulee homeowners say
on the First Coast
“Called about our Hobart commercial range in the morning and it was running again by evening. Genuine Hobart part, flat price, and done in a single visit.”
“Called late at night and a tech was here by mid-morning to look at the Hobart commercial range. You can tell they work on Hobart all the time — quick, clean diagnosis.”
“The Hobart commercial range died mid-week and they had it sorted before I'd even rearranged my schedule. Stood behind the warranty and used a real Hobart OEM part, not a knockoff.”
Other Hobart commercial range problems we fix
Frequently asked questions
What does the call-out cost?
We charge $149 for a full diagnostic, credited to the repair if you proceed. No separate trip fee and no surcharges added later.
How fast can you get to Yulee?
Same-day is common in Yulee. Our trucks run the area every day and emergency slots are held open for breakdowns that can't wait.
How much does a Hobart commercial range that is burner not igniting cost?
Most repairs for a Hobart commercial range that is burner not igniting run $200–$880 including parts and labour. The $149 diagnostic is credited in full toward the repair when you go ahead, and you get a flat quote before any work starts.
Do you warranty your repairs?
Every repair is backed by a 1-year labour warranty and a 6-month parts warranty. If the same issue returns in that window, we come back at no charge.
Get same-day service in Yulee.
Flat-rate pricing, 1 year labour warranty, and fast dispatch.