Hobart Commercial Range Burner Not Igniting in Lakeside, FL
Surface burner clicks but no flame, or no spark at all. Igniter, spark module, or gas valve. We fix this on Hobart commercial ranges across Lakeside. A live dispatcher answers your call — no phone tree, no callback queue.
Why your Hobart commercial range is burner not igniting
Catching burner not igniting early on a Hobart commercial range is usually straightforward: surface burner clicks but no flame, or no spark at all. Igniter, spark module, or gas valve. The usual culprit is clogged burner ports. Left unaddressed, the kitchen loses a station it can't work around.
Most likely causes
- A faulty gas valve
- Failed spark module
- Loose igniter wiring
- A dirty or wet igniter
- A weak spark electrode
Known Hobart commercial range weak points
- wash/rinse arm clogging and scale buildup reducing wash quality
- booster heater and rinse heating element failures causing low sanitizing temperatures
- wash pump motor/seal leaks and drain-valve issues
- door interlock switch and fill/float valve failures
Quick check — and when it's not DIY
Start here — it costs nothing and rules out the easy cause: check whether other burners on the same unit ignite normally, which narrows the fault to one burner or the whole unit. Once you've ruled that out, a gas valve or spark module fault means working on live gas and ignition components, which is licensed work in most areas.
How we fix it
We start with a full diagnostic on the Hobart commercial range, confirm the real fault, then price it flat. Genuine Hobart parts and OEM service kits are widely available; electrical, plumbing, and booster/gas connections must meet local code and be handled by a qualified technician. Most burner not igniting jobs finish same-day, at a flat price, under our warranty.
Independent commercial service experienced with Hobart warewashing equipment; not an authorized Hobart dealer.
What Lakeside homeowners say
on the First Coast
“Two other shops couldn't fit us in — these guys fixed the Hobart commercial range the same day. Clean, on-time, and they took the old part with them. Would call again.”
“The Hobart commercial range broke right before the weekend and they still came out same-day. They clearly knew Hobart inside out and had the part on the truck.”
“No waiting around — the Hobart commercial range was diagnosed within an hour of the tech arriving. Flat price agreed up front, and they stood behind the labour warranty.”
Other Hobart commercial range problems we fix
Frequently asked questions
What does a Hobart commercial range that is burner not igniting usually cost?
Most repairs for a Hobart commercial range that is burner not igniting run $200–$880 including parts and labour. The $149 diagnostic is credited in full toward the repair when you go ahead, and you get a flat quote before any work starts.
What does the call-out cost?
We charge $149 for a full diagnostic, credited to the repair if you proceed. No separate trip fee and no surcharges added later.
What if the same problem comes back?
We stand behind the work with a 1-year labour warranty and 6-month parts warranty — if it recurs in that time, we fix it again for free.
How fast can you get to Lakeside?
Yes. We cover Lakeside daily and offer same-day and emergency service. Booking earlier in the day gives the best chance of an afternoon slot.
Get same-day service in Lakeside.
Flat-rate pricing, 1 year labour warranty, and fast dispatch.