Kenmore Freezer Not Cooling in Fleming Island, FL
Unit runs but temperature stays warm — usually a compressor, condenser, or refrigerant issue. We fix this on Kenmore freezers across Fleming Island. Call early and a technician is usually at your door that same afternoon.
Why your Kenmore freezer is not cooling
Here's how not cooling typically presents on a Kenmore freezer: unit runs but temperature stays warm — usually a compressor, condenser, or refrigerant issue. On this platform it's most often defrost fault icing over the evaporator. Left unaddressed, food or stock can spoil within hours.
Most likely causes
- A bad evaporator fan motor
- Refrigerant leak in the sealed system
- Faulty temperature control board
Known Kenmore freezer weak points
- refrigerator cooling failure (cause varies by OEM) and clogged water filter reducing flow
- dryer not heating from failed heating element, thermal fuse, or thermostat
- washer won't spin or drain from a broken belt or clogged pump
- diagnosis complicated because parts differ by the actual manufacturer
Quick check — and when it's not DIY
There's one thing worth checking before you book anyone: listen for the compressor running at all, and make sure nothing is blocking airflow around the back or bottom vents. Also, confirm the freezer has power, the thermostat is actually set cold, and the condenser coils or vents aren't blocked by dust or stored items. Past that point, not-cooling that keeps recurring after the coils are clean usually means the sealed system has lost its charge, and recharging it needs recovery equipment and an experienced technician.
How we fix it
We trace the not cooling on your Kenmore freezer to its source instead of throwing parts at it. Parts vary by the actual OEM (Whirlpool, LG, or Frigidaire), so correct sourcing requires the model prefix; refrigerator sealed-system work needs an experienced technician. Most not cooling jobs finish same-day, at a flat price, under our warranty.
Independent service experienced with Kenmore appliances, not an authorized Kenmore/Sears service center.
What Fleming Island homeowners say
on the First Coast
“The Kenmore freezer broke right before the weekend and they still came out same-day. Stood behind the warranty and used a real Kenmore OEM part, not a knockoff.”
“No waiting around — the Kenmore freezer was diagnosed within an hour of the tech arriving. Fixed on the first visit — the flat price matched the quote exactly, no upsell.”
“They squeezed our Kenmore freezer in on a busy day and still showed up inside the window. Genuine Kenmore part, flat price, and done in a single visit.”
Other Kenmore freezer problems we fix
Frequently asked questions
What if the same problem comes back?
We stand behind the work with a 1-year labour warranty and 6-month parts warranty — if it recurs in that time, we fix it again for free.
What does the call-out cost?
We charge $89 for a full diagnostic, credited to the repair if you proceed. No separate trip fee and no surcharges added later.
What does a Kenmore freezer that is not cooling usually cost?
Most repairs for a Kenmore freezer that is not cooling run $150–$552 including parts and labour. The $89 diagnostic is credited in full toward the repair when you go ahead, and you get a flat quote before any work starts.
Can you come out same-day in Fleming Island?
Same-day is common in Fleming Island. Our trucks run the area every day and emergency slots are held open for breakdowns that can't wait.
Get same-day service in Fleming Island.
Flat-rate pricing, 1 year labour warranty, and fast dispatch.