Kenmore Freezer Not Cooling in Ponte Vedra, FL
Unit runs but temperature stays warm — usually a compressor, condenser, or refrigerant issue. We fix this on Kenmore freezers across Ponte Vedra. Emergency slots stay open daily for breakdowns that can't wait.
Why your Kenmore freezer is not cooling
On a Kenmore freezer, not cooling usually announces itself like this: unit runs but temperature stays warm — usually a compressor, condenser, or refrigerant issue. Nine times out of ten it comes down to refrigerant leak in the sealed system. Left unaddressed, food or stock can spoil within hours.
Most likely causes
- A stuck or failed damper control
- Dirty or blocked condenser coils
- Defrost fault icing over the evaporator
Known Kenmore freezer weak points
- refrigerator cooling failure (cause varies by OEM) and clogged water filter reducing flow
- dryer not heating from failed heating element, thermal fuse, or thermostat
- washer won't spin or drain from a broken belt or clogged pump
- diagnosis complicated because parts differ by the actual manufacturer
Quick check — and when it's not DIY
Do this first — it takes two minutes: confirm the freezer has power, the thermostat is actually set cold, and the condenser coils or vents aren't blocked by dust or stored items. Also, listen for the compressor running at all, and make sure nothing is blocking airflow around the back or bottom vents. Should that not clear it, not-cooling that keeps recurring after the coils are clean usually means the sealed system has lost its charge, and recharging it needs recovery equipment and an experienced technician.
How we fix it
We start with a full diagnostic on the Kenmore freezer, confirm the real fault, then price it flat. Parts vary by the actual OEM (Whirlpool, LG, or Frigidaire), so correct sourcing requires the model prefix; refrigerator sealed-system work needs an experienced technician. The quote is flat, approved before we start, and every repair carries our warranty.
Independent service experienced with Kenmore appliances, not an authorized Kenmore/Sears service center.
What Ponte Vedra homeowners say
on the First Coast
“Two other shops couldn't fit us in — these guys fixed the Kenmore freezer the same day. Genuine parts, done in one trip, and the invoice matched the quote.”
“Called late at night and a tech was here by mid-morning to look at the Kenmore freezer. Flat price agreed up front, and they stood behind the labour warranty.”
“Called about our Kenmore freezer in the morning and it was running again by evening. They clearly knew Kenmore inside out and had the part on the truck.”
Other Kenmore freezer problems we fix
Frequently asked questions
Is the repair guaranteed?
We stand behind the work with a 1-year labour warranty and 6-month parts warranty — if it recurs in that time, we fix it again for free.
How much does a Kenmore freezer that is not cooling cost?
Typical costs for a Kenmore freezer that is not cooling land between $150–$552, parts and labour included. The $89 call-out is applied to the job and the quote is flat — no meter running.
Is there a fee for the diagnostic?
The $89 diagnostic covers a full on-site inspection and is applied to your repair total. There are no hidden trip charges or surcharges on top of your quote.
Can you come out same-day in Ponte Vedra?
We do — Ponte Vedra is on our daily route, with same-day and after-hours emergency slots. The earlier you call, the better the odds of a same-day visit.
Get same-day service in Ponte Vedra.
Flat-rate pricing, 1 year labour warranty, and fast dispatch.