Perlick Back Bar Cooler Not Cooling in Fleming Island, FL
Unit runs but temperature stays warm — usually a compressor, condenser, or refrigerant issue. We fix this on Perlick back bar coolers across Fleming Island. Call early and a technician is usually at your door that same afternoon.
Why your Perlick back bar cooler is not cooling
A Perlick back bar cooler that is not cooling tends to show the same signs: unit runs but temperature stays warm — usually a compressor, condenser, or refrigerant issue. The usual culprit is defrost fault icing over the evaporator. Left unaddressed, food or stock can spoil within hours.
Most likely causes
- Failed compressor or start relay
- Defrost fault icing over the evaporator
- A bad evaporator fan motor
- Dirty or blocked condenser coils
Known Perlick back bar cooler weak points
- condenser coils clogging with bar dust and lint
- door gasket wear and hinge sag on reach-under boxes
- beer faucet and shank seal leaks
- glycol power-pack / circulation pump faults on remote systems
Quick check — and when it's not DIY
One thing you can rule out on your own: confirm the back bar cooler has power, the thermostat is actually set cold, and the condenser coils or vents aren't blocked by dust or stored items. Should that not clear it, not-cooling that keeps recurring after the coils are clean usually means the sealed system has lost its charge, and recharging it needs recovery equipment and an experienced technician.
How we fix it
Our technician runs a full diagnostic on your Perlick back bar cooler and isolates the exact cause before quoting. OEM parts widely available through Perlick and bar-equipment distributors; sealed-system refrigerant repairs requires an experienced technician. You approve a flat price up front, and the work is backed by our labour and parts warranty.
Independent commercial service experienced with Perlick bar and beverage equipment; not an authorized Perlick dealer.
What Fleming Island homeowners say
on the First Coast
“Called late at night and a tech was here by mid-morning to look at the Perlick back bar cooler. They clearly knew Perlick inside out and had the part on the truck.”
“Called about our Perlick back bar cooler in the morning and it was running again by evening. Clean, on-time, and they took the old part with them. Would call again.”
“The Perlick back bar cooler broke right before the weekend and they still came out same-day. Genuine parts, done in one trip, and the invoice matched the quote.”
Other Perlick back bar cooler problems we fix
Frequently asked questions
What does a Perlick back bar cooler that is not cooling usually cost?
Expect $180–$874 for parts and labour on a Perlick back bar cooler that is not cooling. We charge a $149 diagnostic that comes off the repair total, and nothing begins until you approve a flat price.
Is the repair guaranteed?
You're covered by our 1-year labour warranty and 6-month parts warranty. Should the same fault return inside that period, the follow-up visit is free.
Is there a fee for the diagnostic?
The $149 diagnostic covers a full on-site inspection and is applied to your repair total. There are no hidden trip charges or surcharges on top of your quote.
How fast can you get to Fleming Island?
We do — Fleming Island is on our daily route, with same-day and after-hours emergency slots. The earlier you call, the better the odds of a same-day visit.
Get same-day service in Fleming Island.
Flat-rate pricing, 1 year labour warranty, and fast dispatch.