Perlick Beer Dispenser & Draft System Not Cooling in Fernandina Beach, FL
Unit runs but temperature stays warm — usually a compressor, condenser, or refrigerant issue. We fix this on Perlick beer dispenser & draft systems across Fernandina Beach. Emergency slots stay open daily for breakdowns that can't wait.
Why your Perlick beer dispenser & draft system is not cooling
Here's how not cooling typically presents on a Perlick beer dispenser & draft system: unit runs but temperature stays warm — usually a compressor, condenser, or refrigerant issue. The usual culprit is worn door gaskets bleeding cold air.
Most likely causes
- Defrost fault icing over the evaporator
- A bad evaporator fan motor
- Failed compressor or start relay
- Worn door gaskets bleeding cold air
Known Perlick beer dispenser & draft system weak points
- condenser coils clogging with bar dust and lint
- door gasket wear and hinge sag on reach-under boxes
- beer faucet and shank seal leaks
- glycol power-pack / circulation pump faults on remote systems
Quick check — and when it's not DIY
One thing you can rule out on your own: confirm the beer dispenser & draft system has power, the thermostat is actually set cold, and the condenser coils or vents aren't blocked by dust or stored items. Past that point, not-cooling that keeps recurring after the coils are clean usually means the sealed system has lost its charge, and recharging it needs recovery equipment and an experienced technician.
How we fix it
We trace the not cooling on your Perlick beer dispenser & draft system to its source instead of throwing parts at it. OEM parts widely available through Perlick and bar-equipment distributors; sealed-system refrigerant repairs requires an experienced technician. You approve a flat price up front, and the work is backed by our labour and parts warranty.
Independent commercial service experienced with Perlick bar and beverage equipment; not an authorized Perlick dealer.
What Fernandina Beach homeowners say
on the First Coast
“No waiting around — the Perlick beer dispenser & draft system was diagnosed within an hour of the tech arriving. Fair price, no surprise fees, and the Perlick beer dispenser & draft system has worked perfectly since.”
“The Perlick beer dispenser & draft system broke right before the weekend and they still came out same-day. The diagnostic fee came off the repair total, just like they promised.”
“Two other shops couldn't fit us in — these guys fixed the Perlick beer dispenser & draft system the same day. No runaround — they told me honestly what it needed and fixed just that.”
Other Perlick beer dispenser & draft system problems we fix
Perlick Beer Dispenser & Draft System repair nearby
Frequently asked questions
What's the price for a Perlick beer dispenser & draft system that is not cooling?
Most repairs for a Perlick beer dispenser & draft system that is not cooling run $180–$874 including parts and labour. The $149 diagnostic is credited in full toward the repair when you go ahead, and you get a flat quote before any work starts.
What does the call-out cost?
We charge $149 for a full diagnostic, credited to the repair if you proceed. No separate trip fee and no surcharges added later.
Do you warranty your repairs?
Every repair is backed by a 1-year labour warranty and a 6-month parts warranty. If the same issue returns in that window, we come back at no charge.
Do you offer same-day service in Fernandina Beach?
Yes. We cover Fernandina Beach daily and offer same-day and emergency service. Booking earlier in the day gives the best chance of an afternoon slot.
Get same-day service in Fernandina Beach.
Flat-rate pricing, 1 year labour warranty, and fast dispatch.