Perlick Beer Dispenser & Draft System Not Cooling in Fleming Island, FL
Unit runs but temperature stays warm — usually a compressor, condenser, or refrigerant issue. We fix this on Perlick beer dispenser & draft systems across Fleming Island. Call early and a technician is usually at your door that same afternoon.
Why your Perlick beer dispenser & draft system is not cooling
Here's how not cooling typically presents on a Perlick beer dispenser & draft system: unit runs but temperature stays warm — usually a compressor, condenser, or refrigerant issue. More often than not it traces back to worn door gaskets bleeding cold air.
Most likely causes
- A stuck or failed damper control
- Dirty or blocked condenser coils
- A bad evaporator fan motor
- Faulty temperature control board
- Worn door gaskets bleeding cold air
Known Perlick beer dispenser & draft system weak points
- condenser coils clogging with bar dust and lint
- door gasket wear and hinge sag on reach-under boxes
- beer faucet and shank seal leaks
- glycol power-pack / circulation pump faults on remote systems
Quick check — and when it's not DIY
One thing you can rule out on your own: confirm the beer dispenser & draft system has power, the thermostat is actually set cold, and the condenser coils or vents aren't blocked by dust or stored items. Also, listen for the compressor running at all, and make sure nothing is blocking airflow around the back or bottom vents. If that doesn't fix it, not-cooling that keeps recurring after the coils are clean usually means the sealed system has lost its charge, and recharging it needs recovery equipment and an experienced technician.
How we fix it
We start with a full diagnostic on the Perlick beer dispenser & draft system, confirm the real fault, then price it flat. OEM parts widely available through Perlick and bar-equipment distributors; sealed-system refrigerant repairs requires an experienced technician. You approve a flat price up front, and the work is backed by our labour and parts warranty.
Independent commercial service experienced with Perlick bar and beverage equipment; not an authorized Perlick dealer.
What Fleming Island homeowners say
on the First Coast
“No waiting around — the Perlick beer dispenser & draft system was diagnosed within an hour of the tech arriving. Fair price, no surprise fees, and the Perlick beer dispenser & draft system has worked perfectly since.”
“The Perlick beer dispenser & draft system broke right before the weekend and they still came out same-day. The diagnostic fee came off the repair total, just like they promised.”
“Two other shops couldn't fit us in — these guys fixed the Perlick beer dispenser & draft system the same day. No runaround — they told me honestly what it needed and fixed just that.”
Other Perlick beer dispenser & draft system problems we fix
Perlick Beer Dispenser & Draft System repair nearby
Frequently asked questions
Is there a fee for the diagnostic?
The $149 diagnostic covers a full on-site inspection and is applied to your repair total. There are no hidden trip charges or surcharges on top of your quote.
Can you come out same-day in Fleming Island?
Same-day is common in Fleming Island. Our trucks run the area every day and emergency slots are held open for breakdowns that can't wait.
What's the price for a Perlick beer dispenser & draft system that is not cooling?
Typical costs for a Perlick beer dispenser & draft system that is not cooling land between $180–$874, parts and labour included. The $149 call-out is applied to the job and the quote is flat — no meter running.
Do you warranty your repairs?
We stand behind the work with a 1-year labour warranty and 6-month parts warranty — if it recurs in that time, we fix it again for free.
Get same-day service in Fleming Island.
Flat-rate pricing, 1 year labour warranty, and fast dispatch.