Perlick Beer Dispenser & Draft System Not Cooling in Middleburg, FL
Unit runs but temperature stays warm — usually a compressor, condenser, or refrigerant issue. We fix this on Perlick beer dispenser & draft systems across Middleburg. Our trucks run this area every day, so next-day is the norm and same-day is common.
Why your Perlick beer dispenser & draft system is not cooling
The first things owners spot on a not cooling Perlick beer dispenser & draft system: unit runs but temperature stays warm — usually a compressor, condenser, or refrigerant issue. Nine times out of ten it comes down to worn door gaskets bleeding cold air.
Most likely causes
- Failed compressor or start relay
- Defrost fault icing over the evaporator
- A stuck or failed damper control
Known Perlick beer dispenser & draft system weak points
- condenser coils clogging with bar dust and lint
- door gasket wear and hinge sag on reach-under boxes
- beer faucet and shank seal leaks
- glycol power-pack / circulation pump faults on remote systems
Quick check — and when it's not DIY
The one self-check that's actually worth your time: confirm the beer dispenser & draft system has power, the thermostat is actually set cold, and the condenser coils or vents aren't blocked by dust or stored items. Beyond that, the cause is almost always a failed compressor or a refrigerant leak in the sealed system, and handling refrigerant legally requires an experienced technician — which is where DIY stops.
How we fix it
We start with a full diagnostic on the Perlick beer dispenser & draft system, confirm the real fault, then price it flat. OEM parts widely available through Perlick and bar-equipment distributors; sealed-system refrigerant repairs requires an experienced technician. You approve a flat price up front, and the work is backed by our labour and parts warranty.
Independent commercial service experienced with Perlick bar and beverage equipment; not an authorized Perlick dealer.
What Middleburg homeowners say
on the First Coast
“The Perlick beer dispenser & draft system died mid-week and they had it sorted before I'd even rearranged my schedule. Stood behind the warranty and used a real Perlick OEM part, not a knockoff.”
“Our Perlick beer dispenser & draft system quit on us and they had a technician out the same afternoon in Middleburg. Fixed on the first visit — the flat price matched the quote exactly, no upsell.”
“Called about our Perlick beer dispenser & draft system in the morning and it was running again by evening. Genuine Perlick part, flat price, and done in a single visit.”
Other Perlick beer dispenser & draft system problems we fix
Perlick Beer Dispenser & Draft System repair nearby
Frequently asked questions
How much does a Perlick beer dispenser & draft system that is not cooling cost?
Typical costs for a Perlick beer dispenser & draft system that is not cooling land between $180–$874, parts and labour included. The $149 call-out is applied to the job and the quote is flat — no meter running.
What does the call-out cost?
The $149 diagnostic covers a full on-site inspection and is applied to your repair total. There are no hidden trip charges or surcharges on top of your quote.
How fast can you get to Middleburg?
Same-day is common in Middleburg. Our trucks run the area every day and emergency slots are held open for breakdowns that can't wait.
Do you warranty your repairs?
Every repair is backed by a 1-year labour warranty and a 6-month parts warranty. If the same issue returns in that window, we come back at no charge.
Get same-day service in Middleburg.
Flat-rate pricing, 1 year labour warranty, and fast dispatch.