Traulsen Blast Chiller Not Cooling in Lakeside, FL
Unit runs but temperature stays warm — usually a compressor, condenser, or refrigerant issue. We fix this on Traulsen blast chillers across Lakeside. Weekend and evening slots are available when a weekday won't do.
Why your Traulsen blast chiller is not cooling
Here's how not cooling typically presents on a Traulsen blast chiller: unit runs but temperature stays warm — usually a compressor, condenser, or refrigerant issue. More often than not it traces back to refrigerant leak in the sealed system. Left unaddressed, food or stock can spoil within hours.
Most likely causes
- Refrigerant leak in the sealed system
- Failed compressor or start relay
- Faulty temperature control board
Known Traulsen blast chiller weak points
- door hinge and gasket wear on heavy stainless doors
- evaporator icing and defrost heater/timer failures
- electronic controller (Intela-Traul/legacy) faults
- condenser fan motor and dirty condenser causing temperature rise
Quick check — and when it's not DIY
There's one thing worth checking before you book anyone: listen for the compressor running at all, and make sure nothing is blocking airflow around the back or bottom vents. Also, confirm the blast chiller has power, the thermostat is actually set cold, and the condenser coils or vents aren't blocked by dust or stored items. If none of that changes anything, the cause is almost always a failed compressor or a refrigerant leak in the sealed system, and handling refrigerant legally requires an experienced technician — which is where DIY stops.
How we fix it
Our technician runs a full diagnostic on your Traulsen blast chiller and isolates the exact cause before quoting. Genuine Traulsen/ITW parts are available through distributors; refrigerant/sealed-system repairs require an experienced technician. The quote is flat, approved before we start, and every repair carries our warranty.
Independent commercial service experienced with Traulsen refrigeration; not an authorized Traulsen dealer.
What Lakeside homeowners say
on the First Coast
“Called about our Traulsen blast chiller in the morning and it was running again by evening. Fixed on the first visit — the flat price matched the quote exactly, no upsell.”
“Our Traulsen blast chiller quit on us and they had a technician out the same afternoon in Lakeside. Stood behind the warranty and used a real Traulsen OEM part, not a knockoff.”
“Two other shops couldn't fit us in — these guys fixed the Traulsen blast chiller the same day. You can tell they work on Traulsen all the time — quick, clean diagnosis.”
Other Traulsen blast chiller problems we fix
Frequently asked questions
Is there a fee for the diagnostic?
The $149 diagnostic covers a full on-site inspection and is applied to your repair total. There are no hidden trip charges or surcharges on top of your quote.
What does a Traulsen blast chiller that is not cooling usually cost?
Typical costs for a Traulsen blast chiller that is not cooling land between $280–$1,495, parts and labour included. The $149 call-out is applied to the job and the quote is flat — no meter running.
Do you warranty your repairs?
Every repair is backed by a 1-year labour warranty and a 6-month parts warranty. If the same issue returns in that window, we come back at no charge.
How fast can you get to Lakeside?
Same-day is common in Lakeside. Our trucks run the area every day and emergency slots are held open for breakdowns that can't wait.
Get same-day service in Lakeside.
Flat-rate pricing, 1 year labour warranty, and fast dispatch.