Traulsen Blast Chiller Not Cooling in Yulee, FL
Unit runs but temperature stays warm — usually a compressor, condenser, or refrigerant issue. We fix this on Traulsen blast chillers across Yulee. Most calls get a same-day slot — our vans cover this area daily.
Why your Traulsen blast chiller is not cooling
The first things owners spot on a not cooling Traulsen blast chiller: unit runs but temperature stays warm — usually a compressor, condenser, or refrigerant issue. Nine times out of ten it comes down to a bad evaporator fan motor. Left unaddressed, food or stock can spoil within hours.
Most likely causes
- Worn door gaskets bleeding cold air
- A stuck or failed damper control
- Defrost fault icing over the evaporator
- Failed compressor or start relay
- Faulty temperature control board
Known Traulsen blast chiller weak points
- door hinge and gasket wear on heavy stainless doors
- evaporator icing and defrost heater/timer failures
- electronic controller (Intela-Traul/legacy) faults
- condenser fan motor and dirty condenser causing temperature rise
Quick check — and when it's not DIY
Start here — it costs nothing and rules out the easy cause: listen for the compressor running at all, and make sure nothing is blocking airflow around the back or bottom vents. Also, confirm the blast chiller has power, the thermostat is actually set cold, and the condenser coils or vents aren't blocked by dust or stored items. Should that not clear it, not-cooling that keeps recurring after the coils are clean usually means the sealed system has lost its charge, and recharging it needs recovery equipment and an experienced technician.
How we fix it
First we diagnose the Traulsen blast chiller end to end, so you're not paying to swap parts on a guess. Genuine Traulsen/ITW parts are available through distributors; refrigerant/sealed-system repairs require an experienced technician. The quote is flat, approved before we start, and every repair carries our warranty.
Independent commercial service experienced with Traulsen refrigeration; not an authorized Traulsen dealer.
What Yulee homeowners say
on the First Coast
“The Traulsen blast chiller broke right before the weekend and they still came out same-day. Fair price, no surprise fees, and the Traulsen blast chiller has worked perfectly since.”
“Two other shops couldn't fit us in — these guys fixed the Traulsen blast chiller the same day. The diagnostic fee came off the repair total, just like they promised.”
“Called late at night and a tech was here by mid-morning to look at the Traulsen blast chiller. No runaround — they told me honestly what it needed and fixed just that.”
Other Traulsen blast chiller problems we fix
Frequently asked questions
Do you warranty your repairs?
Every repair is backed by a 1-year labour warranty and a 6-month parts warranty. If the same issue returns in that window, we come back at no charge.
What does the call-out cost?
A flat $149 covers the on-site diagnosis and rolls into the repair price. What we quote is what you pay — no add-ons.
What's the price for a Traulsen blast chiller that is not cooling?
Most repairs for a Traulsen blast chiller that is not cooling run $280–$1,495 including parts and labour. The $149 diagnostic is credited in full toward the repair when you go ahead, and you get a flat quote before any work starts.
How fast can you get to Yulee?
Same-day is common in Yulee. Our trucks run the area every day and emergency slots are held open for breakdowns that can't wait.
Get same-day service in Yulee.
Flat-rate pricing, 1 year labour warranty, and fast dispatch.